White Papers

40 Setting Up the Dell™ DR Series System as a CIFS or VTL Backup Target on EMC® Networker® | April 2015
For example:
iscsiadm -m discovery -t st -p 10.8.230.108
3. Enable logon to the DR Series system iSCSI VTL target(s) by using the following command:
iscsiadm -m node --portal <IP or IQN of DR:PORT> --login
For example:
iscsiadm -m node --portal "10.8.230.108:3260" --login
4. Display the open session(s) with DR VTL(s) by using the following command:
iscsiadm -m session
For example:
iscsiadm -m session = tcp: [8] 10.8.230.108:3260,1 iqn.1984-
05.com.dell:dr4000.3071067.interoprhel52n1.30
5. Review dmesg or /var/log/messages for details about the tape devices created upon adding the
DR Series system iSCSI VTL.
3.2 Setting up Networker to use the newly created iSCSI VTL
1. Access the Devices menu within the Networker Administration interface. Select the Storage Node
that has had the NDMP VTL configured for access. Select to Scan for Devices.