White Papers

98 Setting Up the Dell™ DR Series System as a CIFS or VTL Backup Target on CommVault Simpana |
April 2015
11. Click Yes if you want to erase the media.
12. Watch the progress of the erase from the Job Controller tab.
13. Once the reconciliation process has been completed on the CommVault software.
From the DR initiate a cleaning cycle either via the UI or via the command line. For
example:
> maintenance --filesystem --reclaim_space
Successfully started cleaner.
14. Check to make sure the space has now been reclaimed via the UI or via the
command line. The Cleaner Status should transition from
Running to Pending at
which time the statistics should change to reflect the reclaimed space. For
example:
> stats --system
Capacity Used : 22.0 GiB
Capacity Used in GB : 23.666
Capacity Free : 7970.4 GiB
Capacity Free in GB : 8558.199
Read Throughput : 0.00 MiB/s
Write Throughput : 0.00 MiB/s
Current Files : 66
Current Bytes : 33595753405
Post Dedupe Bytes : 24926224990
Post Compression Bytes : 22734553886
Post Encryption Bytes : 0
Post Encryption Bytes in GiB : 0.0 GiB
Compression Status : Done