Administrator Guide

5. In the Welcome page, click Next to continue.
The End-User License Agreement page is displayed.
6. Click I accept the terms in the License Agreement, and click Next.
7. In the Destination Folder page, accept the default destination location, and click Next.
8. In the Ready to Install Dell Storage Plug-In for Symantec OST page, click Install.
When the plug-in has been installed, the Completed the Dell Storage Plug-In for Symantec OST Setup Wizard page
is displayed.
9. Click Finish to exit the wizard.
Installing the RDA with OST Plug-In for NetBackup on Windows
This topic describes how to install the RDA with OST plug-in on a media server running the supported Microsoft
Windows server operating system software (and using the NetBackup DMA).
Ensure that you have downloaded the RDA with OST plug-in installer into the correct directory on the designated media
server. The plug-in installer is saved as DellOSTPlugin64–xxxxx.msi (for 64–bit operating systems), or DellOSTPlugin-
xxxxx.msi (for 32-bit operating systems). Ensure that the correct plug-in is downloaded to support your 64-bit or 32-bit
system.
1. Stop the NetBackup services if they are running, by using the following command:
$INSTALL_PATH\VERITAS\NetBackup\bin\bpdown.exe
2. Run SETUP to install the plug-in.
3. Check that the plug-in is installed by using the following NetBackup command on the Windows media server:
$INSTALL_PATH\VERITAS\NetBackup\bin\admincmd\bpstsinfo.exe -pi
This NetBackup command lists the plug-in details, as shown in the following example:
• Plug-In Name: libstspiDellMT.dll
• Prefix: DELL
• Label: OST Plug-in that interfaces with the DR Series system
• Build Version: 9
• Build Version Minor: 1
• Operating Version: 9
• Vendor Version: Dell OST plug-in 10.1
4. Start the NetBackup services by using the following command:
$INSTALL_PATH\VERITAS\NetBackup\bin\bpup.exe
Uninstalling the RDA with OST Plug-In for Windows
Use the following process if you need to uninstall the RDA with OST plug-in from a Windows-based media server.
Use the standard Microsoft Windows uninstall process to uninstall the RDA with OST plug-in from a Windows-based
media server.
NOTE: Dell recommends that you retain the RDA with OST plug-in installer on the media server in case you need to
use it to reinstall the plug-in.
1. Click Start, and click Control Panel.
The Control Panel page is displayed.
2. Under Programs and Features, click Uninstall a program.
The Uninstall or change a program page is displayed.
3. Locate the RDA with OST plug-in in the listed of installed programs, right-click and select Uninstall.
The Programs and Features confirmation dialog is displayed.
127