CLI Guide

Syntax
replication --add --name backup --role source --peer 10.250.240.192 --
encryption aes128
Result
Enter password foradministrator@10.250.240.192:
Replication entry created successfully.
Replication Container : backup
Replication Role : Source
Replication Target : 10.250.240.192
Replication Target IP : 10.250.240.192
Replication Target Mgmt Name : 10.250.240.192
Replication Target Mgmt IP : 10.250.240.192
Replication Local Data Name : DR2K-01
Replication Local Data IP : 10.250.208.232
Replication Target Container : backup
Replication Enabled : Yes
Replication Compression Enabled: Yes
Replication Encryption : AES 128-bit
NOTE: To verify that you have successful added a replication link to the DR Series system (or to view the current
status of existing containers), see replication --show.
replication --add --name <name> --role <source | target> --peer <ip address | hostname>
[--peer_name <name>] [--replication_traffic <ip address | hostname>] [--encryption <none
| aes128 | aes256>][--username <user name>]
Description
Add a secondary target to create a cascaded replication configuration.
Syntax
replication --add --name backup --role source --peer 10.250.233.188 --
encryption aes128
Result
Enter password foradministrator@10.250.233.188:
Replication entry created successfully.
Replication Container : backup
Replication Role : Source
Replication Target : 10.250.233.188
Replication Target IP : 10.250.233.188
Replication Target Mgmt Name : 10.250.233.188
Replication Target Mgmt IP : 10.250.233.188
Replication Local Data Name : DR4100-Test
Replication Local Data IP : 10.250.240.192
Replication Target Container : backup
Replication Enabled : Yes
Replication Compression Enabled: Yes
Replication Encryption : AES 128-bit:
NOTE: To verify that you have successful added a replication link to the DR Series system (or to view the current
status of existing containers), see replication --show.
142