CLI Guide

Syntax

network --setdhcp [--bondif <bondN>] [--nwif <ethN>]

--bondif Bond interface to create (dhcp).

--nwif Eth interface to create (dhcp).

Result

Bond device operation successful. Please run 'network --restart' for the

changes to take affect.

network --setstatic_ip [--bondif <bondN>] [--nwif <ethN>] --ip <IPv4/IPv6 address not

already in use> --netmask <netmask> [--gateway <IPv4/IPv6 address>]

Description

Configures the DR Series system to use a static IP address and configures the corresponding netmask (and/or the

routing gateway for a DR Series system). The options bondif and nwif are only available on a Physical DR.

Syntax

network --setstatic_ip --ip 10.20.20.20 --netmask 255.255.222.0 --gateway

10.25.20.10

--bondif Bond interface to create (static).

--nwif Eth interface to create (static).

--ip Static IP address to use.

--netmask Netmask for the static IP address.

--gateway Gateway for routing ('bond0' only).

Result

Bond device operation successful. Please run ’network --restart’ for the

changes to take effect.

network --create_bond

Description

The command allows individual network interfaces to be selected to create a bond. Only non-bonded interfaces can be

used to create a bond. When a bond is created, all the individual interfaces chosen for the bond lose their existing

settings and their settings are managed by the bond. Interface bonding requires all the network devices in the bond to

support the same speed. Interfaces of different devices like twisted pair or fibre can be bonded as long as they support

the bonding speed. Currently, only devices which support the same speed can be bonded together. You can create

multiple bonds, but each bond must be created individually and the maximum number of bonds cannot exceed the

number of devices.

Syntax

--create_bond --bondif <bondN>

[--dhcp]

[--static]

--nwif <eth0,eth1,...,ethN>

[--mode < ALB | 802.3ad>]

[--name < DNS name >]

[--mtu <Supported MTU range 512 - 9000>]

[--ip <IPv4/IPv6 address not already in use>]

[--netmask <netmask>]

[--gateway <IPv4/IPv6 address>]

[--restart]