Owner's Manual

Using the DRAC 5 With Microsoft Active Directory 143
Using Active Directory Single Sign-On
You can enable the DRAC 5 to use Kerberos—a network authentication
protocol—to enable single sign-on and log into the DRAC 5. For more
information on setting up the DRAC 5 to use the Active Directory Single
Sign-On feature, see "Enabling Kerberos Authentication" on page 147.
Configuring the DRAC 5 to Use Single Sign-On
1 Navigate to Remote Access  Configuration tab  Active Directory
subtab  select  Configure Active Directory .
2 On the Active Directory Configuration and Management page, select
Single Sign-On .
This option enables you to log into the DRAC 5 directly after logging into
your workstation.
Logging Into the DRAC 5 Using Single Sign-On
1 Log into your work station using your network account.
2 Access DRAC Web page using https.
https://< IP address>
If the default HTTPS port number (port 443) has been changed, type:
https://< IP address> :< port number >
where IP address is the IP address for the DRAC 5 and port number
is the HTTPS port number.
The DRAC 5 Single Sign-On page appears.
3 Click Login .
The DRAC 5 logs you in, using your credentials that were cached in the
operating system when you logged in using your valid Active Directory
account
.