Users Guide

120 Using the DRAC 5 With Microsoft Active Directory
Figure 6-4. Configuration of DRAC 5 with Microsoft Active Directory and Standard Schema
NOTE: The Bit Mask values are used only when setting Standard Schema with the RACADM.
There are two ways to enable Standard Schema Active Directory:
• With the DRAC 5 web-based user interface. See "Configuring the DRAC 5 With Standard Schema
Active Directory and Web-Based Interface."
Table 6-8. Default Role Group Privileges
Role Groups Default Privilege Level Permissions Granted Bit Mask
Role Group 1 Administrator Login to DRAC, Configure DRAC, Configure Users,
Clear Logs, Execute Server Control Commands, Access
Console Redirection, Access Virtual Media, Test Alerts,
Execute Diagnostic Commands
0x000001ff
Role Group 2 Power User Login to DRAC, Clear Logs, Execute Server Control
Commands, Access Console Redirection, Access
Virtual Media, Test Al erts
0x000000f9
Role Group 3 Guest User Login to DRAC 0x00000001
Role Group 4 None No assigned permissions 0x00000000
Role Group 5 None No assigned permissions 0x00000000
Role
Group
Role
Group Name
and Domain
Name
Role
Definition
User
Configuration on Active
Directory Side
Configuration on
DRAC 5 Side