Users Guide

18 DRAC 5 Overview
DRAC 5 Hardware Features
Figure 1-1 shows the DRAC 5 hardware.
Figure 1-1. DRAC 5 Hardware Features
Hardware Specifications
Power Requirements
Table 1-1 lists the power requirements for the DRAC 5.
Connectors
NOTE: The DRAC 5 hardware installation instructions can be found in the Installing a Remote Access Card
document or the Installation and Troubleshooting Guide included with your system.
The DRAC 5 includes one onboard 10/100 Mbps RJ-45 NIC, a 50-pin management cable, and a 44-pin
MII cable. See Figure 1-1 for the DRAC 5 cable connectors.
Table 1-1. DRAC 5 Power Requirements
System Power
1.2 A on +3.3 V AUX (maximum)
550 mA on +3.3 V main (maximum)
0 mA on +5V main (maximum)
RJ-45 Connector
50-pin management cable
connector
44-pin MII cable
connector