Users Guide

RACADM Subcommand Overview 193

config

NOTE: To use the getconfig command, you must have Log In DRAC 5 permission.

Table 13-4 describes the config and getconfig subcommands.

Synopsis

racadm config [-c|-p] -f <filename>

racadm config -g <groupName> -o <objectName> [-i <index>] <Value>

Supported Interfaces

•Local RACADM

• Remote RACADM

• telnet/ssh/serial RACADM

Description

The config subcommand allows the user to set DRAC 5 configuration parameters individually or to

batch them as part of a configuration file. If the data is different, that DRAC 5 object is written with the

new value.

Input

Table 13-5 describes the config subcommand options.

NOTE: The -f and -p options are not supported for the serial/telnet/ssh console.

Table 13-4. config/getconfig

Subcommand Definition

config Configures the DRAC 5.

getconfig Gets the DRAC 5 configuration data.

Table 13-5. config Subcommand Options and Descriptions

Option Description

-f The -f

option causes config to read the contents of the file specified by

<filename> and configure the DRAC 5. The file must contain data in the format

specified in "Parsing Rules."

-p The -p, or password option, directs config to delete the password entries contained in the

config file -f

after the configuration is complete.

-g The -g

, or group option, must be used with the -o option. The

<groupName> specifies the group containing the object that is to be set.