Users Guide

RACADM Subcommand Overview 197
If available, the coredump information is persistent across RAC power cycles and will remain available
until either of the following conditions occur:
• The coredump information is cleared with the coredumpdelete subcommand.
• Another critical condition occurs on the RAC. In this case, the coredump information will be relative
to the last critical error that occurred.
See the coredumpdelete subcommand for more information about clearing the coredump.
Supported Interfaces
• Remote RACADM
• telnet/ssh/serial RACADM
coredumpdelete
NOTE: To use this command, you must have Clear Logs or Execute Debug Commands permission.
Table 13-8 describes the coredumpdelete subcommand.
Synopsis
racadm coredumpdelete
Description
The coredumpdelete subcommand can be used to clear any currently resident coredump data stored in
the RAC.
NOTE: If a coredumpdelete command is issued and a coredump is not currently stored in the RAC, the command
will display a success message. This behavior is expected.
See the coredump subcommand for more information on viewing a coredump.
Supported Interfaces
•Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
Table 13-8. coredumpdelete
Subcommand Definition
coredumpdelete Deletes the core dump stored in the DRAC 5.