Users Guide

RACADM Subcommand Overview 201
Examples
• racadm getssninfo
Table 13-13 provides an example of output from the racadm getssninfo command.
• racadm getssninfo -A
"root" 143.166.174.19 "Telnet" "NONE"
• racadm getssninfo -A -u *
"root" "143.166.174.19" "Telnet" "NONE"
"bob" "143.166.174.19" "GUI" "NONE"
getsysinfo
NOTE: To use this command, you must have Log In To DRAC 5 permission.
Table 13-14 describes the racadm getsysinfo subcommand.
Synopsis
racadm getsysinfo [-d] [-s] [-w] [-A]
Description
The getsysinfo subcommand displays information related to the RAC, managed system, and watchdog
configuration.
Supported Interfaces
•Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
Table 13-13. getssninfo Subcommand Output Example
User IP Address Type Consoles
root 192.168.0.10 Telnet Virtual KVM
Table 13-14. getsysinfo
Command Definition
getsysinfo Displays DRAC 5 information, system
information, and watchdog status information.