Users Guide

RACADM Subcommand Overview 217
Supported Interfaces
•Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
sslcsrgen
NOTE: To use this command, you must have Configure DRAC 5 permission.
Table 13-32 describes the sslcsrgen subcommand.
Synopsis
racadm sslcsrgen [-g] [-f <filename>]
racadm sslcsrgen -s
Description
The sslcsrgen subcommand can be used to generate a CSR and download the file to the client’s local file
system. The CSR can be used for creating a custom SSL certificate that can be used for SSL transactions
on the RAC.
Options
NOTE: The -f option is not supported for the serial/telnet/ssh console.
Table 13-33 describes the sslcsrgen subcommand options.
NOTE: If the -f option is not specified, the filename defaults to sslcsr in your current directory.
Table 13-32. sslcsrgen
Subcommand Description
sslcsrgen Generates and downloads an SSL certificate
signing request (CSR) from the RAC.
Table 13-33. sslcsrgen Subcommand Options
Option Description
-g Generates a new CSR.
-s Returns the status of a CSR generation process (generation in progress, active, or none).
-f Specifies the filename of the location, <filename>, where the CSR will be downloaded.