Users Guide

268 DRAC 5 Property Database Group and Object Definitions
Legal Values
0 (Terminal)
1 (Basic)
Default
1
Description
When the DRAC 5 cfgSerialConsoleEnable property is set to 0 (disabled), the DRAC 5 serial port
becomes the IPMI serial port. This property determines the IPMI defined mode of the serial port.
In Basic mode, the port uses binary data with the intent of communicating with an application program
on the serial client. In Terminal mode, the port assumes that a dumb ASCII terminal is connected and
allows very simple commands to be entered.
cfgIpmiSerialBaudRate (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
9600, 19200, 57600, 115200
Default
57600
Description
Specifies the baud rate for a serial connection over IPMI.
cfgIpmiSerialChanPrivLimit (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
2 (User)
3 (Operator)
4 (Administrator)
Default
4