Users Guide

4 Contents
Configuring Your Red Hat Enterprise Linux (Version 4) Management Station 32
Installing and Removing RACADM on a Linux Management Station
. . . 32
Installing RACADM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Configuring a Supported Web Browser
. . . . . . . . . . . . . . . . . . . . . 33
Configuring Your Web Browser to Connect to the Web-Based Interface
. 33
List of Trusted Domains
. . . . . . . . . . . . . . . . . . . . . . . . . . . 33
32-bit and 64-bit Web Browsers
. . . . . . . . . . . . . . . . . . . . . . 33
Viewing Localized Versions of the Web-Based Interface . . . . . . . . . 33
Configuring DRAC 5 Properties
. . . . . . . . . . . . . . . . . . . . . . . . . 35
Configuring the DRAC 5 Network Settings
. . . . . . . . . . . . . . . . . . . 35
Adding and Configuring DRAC 5 Users
. . . . . . . . . . . . . . . . . . . . . 35
Updating the DRAC 5 Firmware
. . . . . . . . . . . . . . . . . . . . . . . . . 36
Before You Begin
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Downloading the DRAC 5 Firmware
. . . . . . . . . . . . . . . . . . . . 36
Updating the DRAC 5 Firmware Using the Web-Based Interface
. . . . . 36
Clearing the Browser Cache . . . . . . . . . . . . . . . . . . . . . . . . 37
Accessing the DRAC 5 Through a Network
. . . . . . . . . . . . . . . . . . . 37
Configuring IPMI
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Configuring IPMI Using the Web-Based Interface
. . . . . . . . . . . . . 39
Configuring IPMI Using the RACADM CLI
. . . . . . . . . . . . . . . . . 41
Configuring Platform Events
. . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Configuring Platform Event Filters (PEF) . . . . . . . . . . . . . . . . . . 44
Configuring PET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Configuring E-Mail Alerts
. . . . . . . . . . . . . . . . . . . . . . . . . . 47
3 Configuring and Using the DRAC 5 Command Line Console 49
Command Line Console Features . . . . . . . . . . . . . . . . . . . . . . . . 49
Enabling and Configuring the Managed System to Use a Serial or Telnet Console
49
Using the connect com2 Serial Command . . . . . . . . . . . . . . . . . 50
Configuring the BIOS Setup Program for a Serial Connection on the Managed
System
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Using the Remote Access Serial Interface. . . . . . . . . . . . . . . . . 50
Configuring Linux for Serial Console Redirection During Boot
. . . . . . . 51
Enabling Login to the Console After Boot
. . . . . . . . . . . . . . . . . 53