Users Guide

88 Configuring the DRAC 5 Using the Web User Interface
Configuring Serial Over LAN
NOTE: For complete Serial Over LAN information, see the Dell OpenManage Baseboard Management Controller
User’s Guide.
1 Expand the System tree and click Remote Access .
2 Click the Configuration tab and then click Serial Over LAN .
3 Configure the Serial Over LAN settings.
Table 4-32 provides information about the
Serial Over LAN Configuration page settings.
4 Click Apply Changes .
Table 4-30. Terminal Mode Settings
Setting Description
Line Editing Enables or disables line editing.
Delete Control Select one of the following:
• BMC outputs a <bksp><sp><bksp> character when <bksp> or <del>
is received —
•
BMC outputs a <del> character when <bksp> or <del> is received —
Echo Control Enables or disables echo.
Handshaking Control Enables or disables handshaking.
New Line Sequence Select None, <CR-LF>, <NULL>, <CR>, <LF-CR>, or <LF>.
Input New Line Sequence Select <CR> or <NULL>.
Table 4-31. Terminal Mode Settings Page Buttons
Button Description
Print Print the Terminal Mode Settings page.
Refresh Refresh the Ter min al Mode Se tti ngs page.
Go Back to Serial Port
Configuration
Return to the Serial Port Configuration page.
Apply Changes Apply the terminal mode settings changes.