Owners Manual

NOTE: You may have to unlatch and lift the optional cable management arm if it interferes with the

PSU removal. For information about the cable management arm, see the system’s rack

documentation.

Steps

1. Disconnect all the power cables from the PSU to the system board, hard drives.

2. Remove the screw securing the PSU to the chassis, slide and lift the PSU out of the chassis.

Figure 49. Removing a cabled PSU

1. PSU 2. screw

3. P1 cable connector 4. P2 cable connector

5. P3 cable connector 6. standoff

7. Backplane connector