Owners Manual

1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the Phillips #2 screwdriver handy.
Steps
1. Using a Phillips #2 screwdriver, remove the screw(s) securing the control panel to the chassis.
CAUTION: Do not use excessive force when removing the control panel as it can damage the
connectors.
2. Release the locking tabs of the control panel by angling up the control panel and away from the
system.
3. Remove all the cables connecting the control panel to the chassis.
Figure 61. Removing the control panel—four 3.5-inch hard drive chassis
1. control panel 2. notches (6)
122