Owners Manual

Figure 66. Removing the control panel module—eight hard drive chassis

1. control panel module 2. screw (2)

3. control panel module connector cable

Related Links

Safety instructions

Before working inside your system

After working inside your system

Installing the control panel module

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as

directed by the online or telephone service and support team. Damage due to servicing that is

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions

that are shipped with your product.

1. Follow the safety guidelines listed in the Safety instructions section.

2. Follow the procedure listed in the Before working inside your system section.

Steps

1. Insert the control panel module into the slot in the chassis and align the two screw holes on the

control panel module with the corresponding holes on the chassis.

2. Secure the control panel module with the screws.

3. Connect all the applicable cables to the control panel module.

126