Owners Manual

Table 20. Relative humidity specifications

Relative humidity Specifications

Storage 5% to 95% RH with 33°C (91°F) maximum dew

point. Atmosphere must be non-condensing at all

times.

Operating 10% to 80% relative humidity with 29°C (84.2°F)

maximum dew point.

Table 21. Maximum vibration specifications

Maximum vibration Specifications

Operating 0.26 G

rms

at 5 Hz to 350 Hz (all operation

orientations).

Storage 1.88 G

rms

at 10 Hz to 500 Hz for 15 min (all six

sides tested).

Table 22. Maximum shock specifications

Maximum shock Specifications

Operating Six consecutively executed shock pulses in the

positive and negative x, y, and z axes of 40 G for up

to 2.3 ms.

Storage Six consecutively executed shock pulses in the

positive and negative x, y, and z axes (one pulse on

each side of the system) of 71 G for up to 2 ms.

Table 23. Maximum altitude specifications

Maximum altitude Specifications

Operating

3048 m (10,000 ft)

Storage 12,000 m (39,370 ft)

Table 24. Operating temperature de-rating specifications

Operating temperature de-rating Specifications

Up to 35°C (95°F) Maximum temperature is reduced by 1°C/300 m

(1°F/547 ft) above 950 m (3,117 ft).

35°C to 40°C (95°F to 104°F) Maximum temperature is reduced by 1°C/175 m

(1°F/319 ft) above 950 m (3,117 ft).

40°C to 45°C (104°F to 113°F) Maximum temperature is reduced by 1°C/125 m

(1°F/228 ft) above 950 m (3,117 ft).

Particulate and gaseous contamination specifications

The following table defines the limitations that help avoid any equipment damage or failure from

particulates and gaseous contamination. If the levels of particulates or gaseous pollution exceed the