Owners Manual

NOTE: If your operating system begins to load before you press F2, wait for the system to finish

booting, and then restart your system and try again.

3. On the System Setup Main Menu screen, click System BIOS.

4. On the System BIOS screen, click Memory Settings.

Related Links

Memory Settings

Memory Settings details

The Memory Settings screen details are explained as follows:

Option Description

System Memory

Size

Specifies the memory size in the system.

System Memory

Type

Specifies the type of memory installed in the system.

System Memory

Speed

Specifies the system memory speed.

System Memory

Voltage

Specifies the system memory voltage.

Video Memory Specifies the amount of video memory.

System Memory

Testing

Specifies whether the system memory tests are run during system boot. Options

are Enabled and Disabled. This option is set to Disabled by default.

Memory

Operating Mode

Specifies the memory operating mode. The options available are Optimizer Mode,

Advanced ECC Mode, Mirror Mode, Spare Mode, Spare with Advanced ECC Mode.

This option is set to Optimizer Mode by default.

NOTE: The Memory Operating Mode option can have different default and

available options based on the memory configuration of your system.

Node Interleaving Specifies if Non-Uniform Memory architecture (NUMA) is supported. If this field is

set to Enabled, memory interleaving is supported if a symmetric memory

configuration is installed. If the field is set to Disabled, the system supports NUMA

(asymmetric) memory configurations. This option is set to Disabled by default.

Snoop Mode Specifies the Snoop Mode options. The Snoop Mode options available are Home

Snoop, Early Snoop, and Cluster on Die. This option is set to Early Snoop by

default. This field is available only when the Node Interleaving is set to Disabled.