Owners Manual

Related Links

Safety instructions

Before working inside your system

After working inside your system

Removing the system cover

Installing the cooling shroud

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as

directed by the online or telephone service and support team. Damage due to servicing that is

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions

that are shipped with your product.

1. Follow the safety guidelines listed in the Safety instructions section.

2. Follow the procedure listed in the Before working inside your system section.

Steps

1. Align the guide on the cooling shroud with the slot on the system board.

2. Lower the cooling shroud into the chassis until it is firmly seated.

Figure 17. Installing the cooling shroud

1. cooling shroud 2. guide on the cooling shroud

3. slot on the system board

Next steps

Follow the procedure listed in the After working inside your system section.