Owners Manual

10
Item Indicator, Button, or
Connector
Icon Description
11 Power button
The power button controls the PSU output to the
system.
NOTE: On ACPI-compliant operating
systems, turning o the system using the
power button causes the system to perform
a graceful shutdown before power to the
system is turned o.
12 System identification
button
The identification button can be used to locate a
particular system within a rack.
Press to toggle the system ID on and o.
If the system stops responding during POST,
press and hold the system ID button for more
than five seconds to enter BIOS progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup)
press and hold the button for more than 15
seconds.
NOTE: Features of sled B are for dual-node systems only.
Back-panel features and indicators
2 3 4 13 14
Sled B
Sled A
5 11 12 151 6 7 10
17 16
8 9
Figure 2. Back-panel features and indicators
Item Indicator, Button, or
Connector
Icon Description
1 Blade EN connector
(optional)
This function is reserved.