Owners Manual

Related Links

Removing the expansion-card riser module

Installing the expansion-card riser module

Removing an expansion card

Installing an expansion card

Removing the server sled

Installing the server sled

Cooling shroud

Removing the cooling shroud

Prerequisites

CAUTION: Many repairs may only be done by a certiﬁed service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as

directed by the online or telephone service and support team. Damage due to servicing that is

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions

that came with the product.

1. Ensure that you read the Safety instructions.

2. Complete the procedure listed in Before working inside your system.

3. Remove the expansion-card riser module.

4. Remove the CPU2 power cable.

CAUTION: Never operate your system with the cooling shroud removed. The system may get

overheated quickly, resulting in shutdown of the system and loss of data.

Steps

Remove the three screws and lift the shroud away from the system board.

Figure 22. Removing and installing the cooling shroud

1 screw (3)