Owners Manual

65
Wait 30 seconds for the heat sink to loosen from the processor.
2. Remove the screw diagonally opposite the screw you first removed.
3. Repeat the procedure for the remaining two screws.
4. Remove the heat sink.
Figure 25. Removing and installing a processor heat sink
1 captive screw (4) 2 heat sink
3 processor socket 4 slot (4)
CAUTION: The processor is held in its socket under strong pressure. Be aware that the release
lever can spring up suddenly if not firmly grasped.
Figure 26. Processor shield opening and closing lever sequence