Owners Manual

79
Steps
1. Insert the HDD into the HDD carrier with the connector end of the HDD toward the back.
2. Align the screw holes on the HDD with the set of screw holes on the HDD carrier.
When aligned correctly, the back of the HDD is flush with the back of the HDD carrier.
3. Attach the screws to secure the HDD to the HDD carrier.
System fans
Your system supports up to six system fans in a redundant PSU configuration.
Removing a system fan
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: The procedure for removing each fan is identical.
CAUTION: The replacement service time for the system fans when the system is operating is two
minutes.
1. Ensure that you read the Safety instructions.
2. Complete the procedure listed in Before working inside your system.
3. Remove the system cover.
Steps
1. Pull the two handles inward and lift the fan out of the system fan cage.
2. Lift the fan out of the system fan cage.
Figure 36. Removing and installing a system fan