Owners Manual

85
3. Complete the procedure listed in After working inside your system.
4. While booting, press F2 to start the System Setup and ensure the battery is operating properly.
5. Enter the correct time and date in the System Setup Time and Date fields.
6. Exit the System Setup.
Related Links
Removing the expansion-card riser module
Removing an expansion card
Installing a riser card
Installing the expansion-card riser module
Removing the server sled
Installing the server sled
Interposer board
Removing the interposer board
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Complete the procedure listed in Before working inside your system.
3. Remove the PSUs from the system.
4. Remove the server sleds.
5. Remove the system cover.
6. Remove the system fans and fan cage.
Steps
1. Disconnect all cables from the interposer board.
2. Pull the latch upward and lift the interposer board out of the chassis.