Owners Manual

b. Remove the air shroud.
c. Remove the GPU card.
d. Remove the GPU support bracket.
e. Remove the PCIe switch board module.
f. Remove the system board tray module.
Steps
1. Remove the four screws securing the PSB power interposer board to the system.
2. Lift the PSB power interposer board from the system.
Figure 91. Removing the PSB power interposer board
Next steps
1. Disconnect all cables from the PSB power interposer board.
2. Install the PSB power interposer board.
Installing the PSB power interposer board
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Connect all cables to the PSB power interposer board
Steps
1. Install the PSB power interposer board to the system.
2. Tighten the four screws to secure the PSB power interposer board to the system.
Installing and removing system components
103