Owners Manual

Next steps
1. Connect the fan cable to the PSB power interposer board.
2. Install the following:
a. Install the front control module.
b. System board tray module.
c. Air shroud
d. PCIe switch board module.
e. System cover
3. Follow the procedure listed in After working inside your system
Handle
Removing the handle
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure listed in Before working inside your system.
Steps
1. Unlock the handle by plunger.
2. Remove the handle from the chassis.
Figure 100. Removing the handle
Next steps
1. Install the handle.
2. Follow the procedure listed in After working inside your system
Installing the handle
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
Installing and removing system components
111