Owners Manual
Table Of Contents
- Dell EMC DSS8440 Installation and Service Manual
- Contents
- About this document
- DSS8440 system overview
- Technical specifications
- Chassis dimensions
- Chassis weight
- Processor specifications
- PSU specifications
- Cooling fans specifications
- System battery specifications
- Expansion card riser specifications
- GPU specifications
- Memory specifications
- Drive specifications
- Ports and connectors specifications
- Environmental specifications
- System diagnostics and indicator codes
- Initial system setup and configuration
- Pre-operating system management applications
- Options to manage the pre-operating system applications
- System Setup
- Viewing System Setup
- System Setup details
- System BIOS
- Viewing System BIOS
- System BIOS Settings details
- System Information
- Viewing System Information
- System Information details
- Memory Settings
- Viewing Memory Settings
- Memory Settings details
- Processor Settings
- Viewing Processor Settings
- Processor Settings details
- SATA Settings
- Viewing SATA Settings
- SATA Settings details
- Boot Settings
- Viewing Boot Settings
- Choosing system boot mode
- Changing boot order
- Network Settings
- Viewing Network Settings
- Network Settings screen details
- UEFI iSCSI Settings
- Viewing UEFI iSCSI Settings
- UEFI iSCSI Settings details
- Integrated Devices
- Viewing Integrated Devices
- Integrated Devices details
- Serial Communication
- Viewing Serial Communication
- Serial Communication details
- System Profile Settings
- Viewing System Profile Settings
- System Profile Settings details
- System Security
- Viewing System Security
- System Security Settings details
- Creating a system and setup password
- Using your system password to secure the system
- Deleting or changing system and setup password
- Operating with setup password enabled
- Redundant OS Control
- Viewing Redundant OS Control
- Redundant OS Control screen details
- Miscellaneous Settings
- Viewing Miscellaneous Settings
- Miscellaneous Settings details
- iDRAC Settings utility
- Device Settings
- Dell Lifecycle Controller
- Boot Manager
- PXE boot
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- System cover
- Front bezel
- Air shroud
- Drives
- Drive backplane
- Power supply unit
- Expansion cards and expansion card risers
- Removing a GPU
- Installing a GPU
- Removing a GPU support bracket
- Installing a GPU support bracket
- Removing the PCIe switch board
- Installing the PCIe switch board
- Removing a GPU power interposer board
- Installing a GPU power interposer board
- Removing a butterfly module and riser 3 board
- Installing the riser 3 board and butterfly module
- Nvidia Tesla T4 GPU
- Nvidia A100 GPU and NVLink bridge
- Nvidia A40 GPU and NVLink bridge
- Processor and heat sink
- System memory
- Riser 2 module
- Riser 1 module
- Network daughter card
- System board tray module
- System board and power interposer board
- Backup battery
- Power distribution board
- PSB power interposer board
- Front control module
- Fan louvers
- Cooling fans
- Fan cage
- Handle
- Slide rail installation
- Cable Routing
- Dell EMC DSS8440 cable instruction
- 3M cable Installation-Config A left
- 3M cable Installation-Config A right
- Fan cable assembly to fan bracket
- Fan cable MB-PDB assembly to MB
- Fan cable MB-PDB assembly to PDB
- Front control cable assembly control board to MB
- GPU power cable assembly GPU card to PSB
- IDC cable MB-PDB assembly to PDB
- IDC cable MB-PDB assembly to MB
- IDC cable PDB-PIB assembly to PIB
- IDC cable PIB-PDB assembly to PDB
- IDC cable Riser1-PDB assembly to PDB
- IDC cable Riser1-PDB assembly to riser board1
- IDC cable PIB-PDB assembly to PDB
- IDC cable Riser 2- PDB assembly to riser board 2
- Mini SAS HD cable assembly PERC-HDBP
- Mini SAS HD cable assembly HDBP-MB
- Power cable BP-PDB assembly to BP
- Power cable BP-PDB assembly to PDB
- Power cable assembly to PDB
- Power cable assembly to PIB
- Power cable1 assembly to Riser1
- Power cable2 Riser-PDB assembly to PDB
- Power cable2 Riser-PDB assembly to Riser
- Jumpers and connectors
- Getting help
NOTE: It is recommended that you always use an antistatic mat and antistatic strap while working on components inside
the system.
CAUTION: To ensure proper operation and cooling, all bays in the system and system fans must be always
populated with a component or a blank.
Before working inside your system
Prerequisites
Follow the safety guidelines listed in Safety instructions.
Steps
1. Power off the system and all attached peripherals.
2. Disconnect the system from the electrical outlet, and disconnect the peripherals.
After working inside your system
Prerequisites
Follow the safety guidelines listed in Safety instructions.
Steps
1. Reconnect the peripherals and connect the system to the electrical outlet.
2. Power on the attached peripherals and then power on the system.
Recommended tools
You need the following tools to perform the removal and installation procedures:
● Cross head srewdriver (#2 bit)
● Needle nosed pliers
● Anti-static wrist strap and conductive foam pad (recommended)
● Torx #T30 screwdriver
● Torx #T15 screwdriver
● Plastic scribe
System cover
Removing the system cover
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Power off the system and all attached peripherals.
3. Disconnect the system from the electrical outlet and disconnect the peripherals.
Steps
1. Loosen and remove the captive screw on the system cover
2. Slid the system cover backwards and lift the cover from the system.
Installing and removing system components
43