Owners Manual

Figure 76. Installing the Mini PERC assembly
Table 54. Assembly material
Description Quantity Torque (lbs/inch)
#6-32 screw 3 6 ± 0.2
1 Complete the procedure listed in After working inside your system.
M.2 SSD Module
Removing x8 PCIe M.2 card
1 Ensure that you read the Safety instructions.
2 Complete the procedure listed in Before working inside your system.
1 Remove the securing screws from the PCIe M.2 assembly.
2 Remove the PCIe M.2 assembly from the chassis.
NOTE
: You must install an expansion card ller cover over an empty expansion slot to maintain Federal Communications
Commission (FCC) certication of the system. The covers also keep dust and dirt out of the system and aid in proper
cooling and airow inside the system.
122 Installing and removing server components