Owners Manual

Figure 107. Removing the riser board
1 Install the PCIe card.
2 Complete the procedure listed in After working inside your system.
3 Install any device drivers needed for the card as described in the documentation for the card.
Installing PCIe card
1 Follow the procedure listed in the After working inside your system.
2 Complete the procedure listed in Before working inside your system.
1 Remove the screws securing the riser bracket.
2 Remove the riser bracket from the chassis.
NOTE
: The PCIe bracket is customized for this system. Retain the bracket if replacing a new PCIe card for use with the new
PCIe card.
3 Align the holes on riser board with the holes on riser bracket.
4 Secure the riser board with screws.
Installing and removing server components
153