Owners Manual

Figure 135. Installing the riser board on a bracket
Table 73. Assembly material
Description Quantity Torque (lbs/inch)
#6-32 screw 2 6 ± 0.2
5 Align the NPIO card with the riser bracket and the riser board connector.
6 Insert the NPIO card in the connector on the riser board.
7 Secure the NPIO card with the provided screw.
NOTE
: You must install an expansion card ller cover over an empty expansion slot to maintain Federal Communications
Commission (FCC) certication of the system. The covers also keep dust and dirt out of the system and aid in proper
cooling and airow inside the system.
Installing and removing server components 181