Owners Manual

WARNING: The memory modules are hot to touch for some time after the system has been powered down. Allow the memory
modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components or
metallic contacts on the memory module.
CAUTION: To ensure proper system cooling, memory module blanks must be installed in any memory socket that is not occupied.
Remove memory module blanks only if you intend to install memory modules in those sockets.
1 Locate the appropriate memory module.
CAUTION: Handle each memory module by the card edges, ensuring not to touch the middle of the memory module or
metallic contacts.
2 Press down on the two memory module locking latches. The memory module partially ejects.
3 Lift the memory module.
Figure 6. Removing the memory module
1 Install the new memory module.
2 Complete the procedure listed in After working inside your system.
Installing memory module
1 Ensure that you read the Safety instructions.
2 Complete the procedure listed in Before working inside your system.
WARNING
: Allow the memory modules to cool after you power o the system. Handle the memory modules by the card edges
and avoid touching the components or metallic contacts on the memory module.
52 Installing and removing server components