Owners Manual

4 Push the release latches to unlock the heat sink.

5 Remove the processor assembly and heat sink.

Figure 9. Removing the heat sink

1 Separate the heat sink and the processor.

2 Remove the processor.

3 Complete the procedure listed in After working inside your system.

Removing processor

NOTE

: If the new heat sink includes a thermal pad, it is not necessary to apply thermal grease to the top of the processor.

1 Ensure that you read the Safety instructions.

2 Before upgrading your system, download the latest system BIOS version from http://dell.com/support and follow the instructions

included in the compressed download le to install the update on your system.

NOTE

: You can update the system BIOS using the Lifecycle Controller. For more information about Dell Lifecycle controller,

see http://dell.com/idracmanuals.

3 Complete the procedure listed in Before working inside your system.

4 Remove the heat sink.

1 Press the locking latches on all sides of the assembly and lift the heat sink out.

2 Remove the heat sink to expose the carrier and processor.

Installing and removing server components