Owners Manual

Table 51. Assembly material
Description Quantity Torque (lbs/inch)
#6-32 screw 3 6 ± 0.2
Next step
1 Complete the procedure listed in After working inside your system.
Removing Mini PERC
Prerequisites
1 Ensure that you read the Safety instructions.
2 Complete the procedure listed in Before working inside your system.
Steps
1 Remove the securing screws from the Mini PERC assembly.
2 Remove the Mini PERC assembly from the chassis.
NOTE: You must install an expansion card ller cover over an empty expansion slot to maintain Federal Communications
Commission (FCC) certication of the system. The covers also keep dust and dirt out of the system and aid in proper
cooling and airow inside the system.
Figure 66. Removing the Mini PERC assembly
3 Remove the bridge board from the Mini PERC assembly.
144
Installing and removing server components