Owners Manual

Figure 70. Installing the bezel and riser board
Table 52. Assembly material
Description Quantity Torque (lbs/inch)
#6-32 screw 3 6 ± 0.2
4 Align the Mini PERC on the riser board making sure the screw holes line up.
5 Install the Mini PERC card on the bezel and riser board.
6 Place the PERC cable over the Mini PERC connectors and install.
7 Secure the Mini PERC cable and the Mini PERC with the captive screws.
Installing and removing server components
147