Owners Manual

Table 57. Assembly material
Description Quantity Torque (lbs/inch)
#6-32 screw 3 6 ± 0.2
3 Flip over the SATA M.2 assembly.
4 Align the M.2 SSD board with the protrusion in the SATA M.2 card.
5 Insert the M.2 SSD until it is fully seated in the connector.
6 Lower the M.2 SSD board and hold it in place.
7 Secure the M.2 SSD board to the SATA M.2 card with the captive screw.
Figure 87. Installing the M.2 SSD board
8 Align the bridge board in the SATA M.2 card connector.
9 Install the bridge board.
168
Installing and removing server components