Owners Manual
Table 63. Assembly material
Description Quantity Torque (lbs/inch)
#6-32 screw 2 6 ± 0.2
5 Align the PCIe card with the riser bracket and the riser board connector.
6 Insert the PCIe card in the connector on the riser board.
7 Secure the PCIe card with the provided screw.
NOTE: You must install an expansion card ller cover over an empty expansion slot to maintain Federal Communications
Commission (FCC) certication of the system. The covers also keep dust and dirt out of the system and aid in proper
cooling and airow inside the system.
204 Installing and removing server components