Owners Manual

8 Remove the securing stando screw from the transfer board.
9 Slide the transfer board to release it from the securing pin on the OCP bracket and remove it.
Figure 111. Removing the transfer board
Next steps
1 Install the OCP card into slot 1.
2 Complete the procedure listed in After working inside your system.
Installing OCP card into slot 1
Prerequisites
1 Ensure that you read the Safety instructions.
2 Complete the procedure listed in Before working inside your system.
Steps
1 Align the slits on the transfer board with the securing pins on the OCP bracket.
2 Slide the transfer board into the pins until the securing holes on the transfer board and OCP bracket align.
3 Secure the transfer board with a stando screw.
214
Installing and removing server components