Owners Manual

Next steps
1 Install the 3M riser card.
2 Complete the procedure listed in After working inside your system.
3 Install any device drivers needed for the card as described in the documentation for the card.
Installing 3M riser card
Prerequisites
1 Ensure that you read the Safety instructions.
2 Read and understand the cable routing plan in Cable routing overview.
3 Complete the procedure listed in Before working inside your system.
About this task
Cable routing overview
The following routing plan is available for the 3M riser card installation. To ensure correct cable position see Figure 128 for further details.
Figure 124. Cable routing overview
Steps
1 Remove the screws securing the riser bracket.
2 Remove the riser bracket from the chassis.
NOTE
: The PCIe bracket is customized for this system. Retain the bracket if replacing with a new PCIe card.
3 Align the holes on riser board with the holes on riser bracket.
4 Secure the riser board with screws.
238
Installing and removing server components