Owners Manual

Next step
1 Complete the procedure listed in After working inside your system.
Hard drive backplane
Removing HDD backplane
Prerequisites
NOTE: The procedure is available only for DSS 9620 server with 2.5-inch hot swappable HDDs.
1 Ensure that you read the Safety instructions.
2 Complete the procedure listed in Before working inside your system.
3 Remove the 3.5-inch or 2.5-inch hot swappable HDDs.
Steps
1 Disconnect the power cabling and miniSAS cable from the HDD backplane.
2 Remove the securing screw from the HDD backplane.
3 Lift up the HDD backplane to remove from the chassis.
278 Installing and removing server components