Owners Manual
Option Description
• Capacity: Species the total capacity of the hard drive. This eld is undened for
removable media devices such as optical drives.
Port G
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this eld to Auto to enable BIOS support. Set it to OFF to turn o BIOS
support.
For AHCI mode, BIOS support is always enabled.
Port H
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this eld to Auto to enable BIOS support. Set it to OFF to turn o BIOS
support.
For AHCI mode, BIOS support is always enabled.
• Model: Species the drive model of the selected device.
• Drive Type: Species the type of drive attached to the SATA port.
• Capacity: Species the total capacity of the hard drive. This eld is undened for
removable media devices such as optical drives.
Port I
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this eld to Auto to enable BIOS support. Set it to OFF to turn o BIOS
support.
For AHCI mode, BIOS support is always enabled.
• Model: Species the drive model of the selected device.
• Drive Type: Species the type of drive attached to the SATA port.
• Capacity: Species the total capacity of the hard drive. This eld is undened for
removable media devices such as optical drives.
Port J
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this eld to Auto to enable BIOS support. Set it to OFF to turn o BIOS
support.
For AHCI mode, BIOS support is always enabled.
• Model: Species the drive model of the selected device.
• Drive Type: Species the type of drive attached to the SATA port.
• Capacity: Species the total capacity of the hard drive. This eld is undened for
removable media devices such as optical drives.
Integrated Devices
You can use the Integrated Devices screen to view and congure the settings of all integrated devices including the video controller,
integrated RAID controller, and the USB ports.
Viewing Integrated Devices
About this task
To view the Integrated Devices screen, perform the following steps:
Steps
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
40
Pre-operating system management applications