Dell™ E-View Laptop Stand User’s Guide w w w. d e l l . c o m | s u p p o r t . d e l l .
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. ____________________ Information in this document is subject to change without notice. © 2008 Dell Inc. All rights reserved.
Contents 1 About Your Dell™ E-View Laptop Stand 2 Using the E-View Laptop Stand . Unlocking the Laptop Stand . . . 5 . . . . . . . . 7 . . . . . . . . . . . . . . . 7 . . . . . . . . 8 . . . . . . . . . . 9 Adjusting the Height of the Laptop Stand . Adjusting the Tilt of the Laptop Stand . Moving the Laptop Stand From Side-to-Side . . . . . . . . . 11 . . . . . . . 13 Connecting the Laptop Stand to a Port Replicator Connecting a Laptop to a Port Replicator in the Laptop Stand . . . . . .
Contents
1 About Your Dell™ E-View Laptop Stand The Dell™ E-View Laptop Stand supports E-Family laptop computers ranging in size from 12.1 inches to 17 inches.
1 2 3 6 1 release button for port replicator 3 cable holder 2 About Your Dell™ E-View Laptop Stand height adjustment lock/unlock switch
Using the E-View Laptop Stand 2 Unlocking the Laptop Stand The laptop stand ships in the locked position. To unlock the laptop stand: 1 Push down on the front of the laptop stand to tilt it forward. 2 Move the lock/unlock switch to the unlocked position.
Adjusting the Height of the Laptop Stand 1 Lift or lower the top of the laptop stand to the desired height. 2 Move the lock/unlock switch to the locked position to lock the laptop stand in place.
Adjusting the Tilt of the Laptop Stand In addition to adjusting the height of the laptop stand, you can also tilt the stand forward. 1 Turn the tilt lock counter-clockwise. 2 Push down on the front of the laptop stand while simultaneously lifting the back of the laptop stand to tilt it forward to the desired angle. 3 Turn the tilt lock clockwise to lock the stand in place.
Moving the Laptop Stand From Side-to-Side You can move the laptop stand from side-to-side from the front of the base.
Connecting the Laptop Stand to a Port Replicator 1 With the front of the port replicator raised slightly, slide the port replicator toward the back of laptop stand until the port replicator rests against the guide posts. 2 Push down on the port replicator to secure it to the release tab on the laptop stand. 3 2 1 1 top of laptop stand 3 guide stops for the docking stand 2 port replicator 3 Follow the procedures for setting up your port replicator.
4 Route all cables through the cable holder.
Connecting a Laptop to a Port Replicator in the Laptop Stand 1 Hold the laptop at an angle and place the front of the laptop on the size adjustment tray. 2 Use your laptop to slide the tray out if you need to adjust the space to accomodate a larger laptop. 3 Center the laptop with port replicator and lower the back of the laptop onto the port replicator. 4 Push down on the laptop to connect the laptop to the port replicator. You should feel the laptop click into place.
Disconnecting a Laptop From a Port Replicator on a Laptop Stand 1 Push the laptop eject button on the port replicator. 2 Lift the laptop away from the port replicator and laptop stand.
Removing the Port Replicator From the Laptop Stand 1 Disconnect all cables from the port replicator. 2 Press the release button on the back of the laptop stand, then lift the front of the port replicator to release it from the release tab on the laptop stand. 3 Remove the port replicator from the laptop stand.
Using the E-View Laptop Stand
3 Specifications Physical Height 102 mm (4.02 inches) Depth 353 mm (13.90 inches) Width 288 mm (11.34 inches) Laptop Stand Weight 2.8 kg (6.17 lb) Product Support Specifications Laptop size supports Dell™ 12.1–17 inch E-Family laptops Laptop weight range supports 1.0–5.0 kg (2.20–11.02 lb) Port replicator sizes supports Dell E-Family docking devices (E-Port and E-Port Plus) Port replicator weight 1.0 kg (2.
Specifications
4 Finding Information Documents Contents Safety, Regulatory, Warranty, and Support • Warranty information Documentation • Terms and Conditions (U.S. only) This type of information may have • Safety instructions shipped with your computer. For additional regulatory information, see the • Regulatory information Regulatory Compliance Homepage on • Ergonomics information www.dell.com at the following location: • End User License Agreement www.dell.com/regulatory_compliance.
Finding Information