Installation guide

52 | RPM Ports and Cables

www.dell.com | support.dell.com

• Window Terminal Emulator option set to NO

• 24 lines X 80 characters

• No flow control (console port only)

• Hardware flow control (RTS/CTS) (for auxiliary port only)

Cable and Adapter Pin Assignments

Use the E1200 Console port on the RPM to connect to a terminal port, PC serial port, or a terminal server

to configure and monitor your system. Use the E1200 Auxiliary port on the RPM to connect to a modem.

Both the Console and Auxiliary port are RJ-45 ports.

Figure 10-1

displays the pinouts in an RJ-45 port.

Figure 10-1. Pinout for an RJ-45 Connector End Adaptors

Table 10-1

displays the RJ-45 console port pin assignments.

Table 10-2

displays the RJ-45 auxiliary port

pin assignments.

Table 10-1. Console Port (RJ-45) Pin Assignments

Pin Signal Input/Output

1 NC (unused) -

2 DTR Output

3 TxD Output

4 GND -

5 GND -

6 RxD Input

7 DSR Input

8 NC (unused) -

Table 10-2. Auxiliary Port (RJ-45) Pin Assignments