Installation guide
Using a Flash Memory Card | 67
13
Using a Flash Memory Card
This appendix provides information about using an external flash memory card and contains the
following sections:
• External Flash Memory Card
• Inserting the External Flash Memory Card
• Removing the External Flash Memory Card
• Formatting an External Flash Card
• Copying Files to the External Flash
• Displaying Files Stored on the External Flash
• External Flash Memory Card
• Formatting an External Flash Card
•
Inserting the External Flash Memory Card
•
Removing the External Flash Memory Card
• Copying Files to the External Flash
• Displaying Files Stored on the External Flash
External Flash Memory Card
Each RPM card is designed with a slot to accommodate an external flash memory card (slot0:). You can
use a flash card to copy the image and configuration files for storage and backup purposes. For complex
configurations, use the copies for other E1200 systems in your network. Configure your boot execution
process to use the images stored on a flash card as the primary (active), secondary (standby), or default
boot order preference. Optional external flash memory cards are shipped blank.
Inserting the External Flash Memory Card
NOTE: Only insert the external flash before system boot or after the system has completed its boot and is run-
time mode.