Bedienungsanleitung Dell E1916H Dell E1916He Dell E2016H Dell E2216H Dell E2316H Dell E2316Hr Dell E2416H Dell E2416HM Richtlinienmodell: E1916Hf / E1916Hef / E2016Hb / E2216Hf / E2316Hf / E2416Hb
HINWEIS: Ein HINWEIS enthält wichtige Informationen, die Ihnen bei einer optimaleren Nutzung Ihres Monitors behilflich sind ACHTUNG: ACHTUNG weist auf potenzielle Hardwareschäden oder Datenverluste hin, wenn Anweisungen nicht befolgt werden. WARNUNG: Eine WARNUNG weist auf die Möglichkeit von Sachschäden, Körperverletzungen oder Todesfällen hin. © 2015~2019 Änderungen der Informationen in diesem Dokument sind vorbehalten.
Inhalt: Über Ihren Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Lieferumfang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Produktmerkmale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Übersicht über Einzelteile und Bedienelemente . . . . . . . . . . . . . . 7 Technische Daten des Monitors . . . . . . . . . . . . . . . . .
Problemlösung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Selbsttest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 Integrierte Diagnose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Allgemeine Probleme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Produktspezifische Probleme . . . . . . . . . . . . .
Über Ihren Monitor Lieferumfang Ihr Monitor wird mit allen nachstehend aufgelisteten Komponenten ausgeliefert. Vergewissern Sie sich, dass Sie alle Komponenten erhalten haben und Dell kontaktieren, falls etwas fehlen sollte. NHINWEIS: Bei einigen Artikeln könnte es sich um Optionen handeln, die Ihrem Monitor eventuell nicht mitgeliefert werden. Einige Merkmale oder Medien sind in bestimmten Ländern möglicherweise nicht verfügbar.
• Schnelleinrichtungsanleitung • Sicherheits- und Richtlinienhinweise Produktmerkmale Der Dell E1916H / E1916He / E2016H / E2216H / E2316H / E2316Hr / E2416H / E2416HM -Flachbildschirm besitzt eine Aktivmatrix-Dünnfilmtransistor TFT)- Flüssigkristallanzeige (LCD) sowie eine LED-Hintergrundbeleuchtung.
• E1916He / E2016H / E2216H / E2316H/E2316Hr / E2416H / E2416HM: TCOzertifizierte Displays. • Energy Gauge zeigt den aktuellen Energieverbrauch des Monitors in Echtzeit an. • Analoge Verdunkelungssteuerung der Hintergrundbeleuchtung für flimmerfreie Anzeige. Übersicht über Einzelteile und Bedienelemente Vorderseite 1.
E2216H / E2316H / E2316Hr / E2416H / E2416HM: Rückansicht mit Monitorständer Nummer Beschreibung 1 2 VESA-Montagelöcher (100 Zur Montage des Monitors. mm) Amtliches Leistungsschild Listet die amtlichen Zulassungen auf. 3 Schlitz für Sicherheitsschloss 4 Etikett mit BarcodeSeriennummer 5 Kabelverwaltungsschlitz Ansicht von der Seite Rechte Seite 8 Verwendung Sichert den Monitor mit dem Sicherheitsschloss (Sicherheitsschloss nicht inklusive).
Unterseite Nummer Beschreibung Verwendung 1 AC-Netzanschluss Für den Anschluss der Monitornetzleitung. 2 DisplayportAnschluss VGA-Anschluss Für den Anschluss Ihres Computers an den Monitor mit einem Displayport-Kabel. Für den Anschluss Ihres Computers an den Monitor mit einem VGA-Kabel. Zum Anbringen der optionalen Dell-Soundbar.
E2016H VESA-Modi Horizontale Vertikale Video Betriebsanzeige Stromverbrauch Sync Sync Normaler Betrieb Aktiv Aktiv Aktiv Weiß 19 W (Maximum)** Energiesparmodus Inaktiv Inaktiv Schwarz Leuchtet weiß 15 W (typisch) Weniger als 0,3 W Ausschalten - - Aus Weniger als 0,3 W 11,2 W 41,7 kWh Stromverbrauch Pon Gesamtenergieverbrauch (TEC) E2216H VESA-Modi Horizontale Vertikale Video Betriebsanzeige Stromverbrauch Sync Sync Normaler Betrieb Aktiv Aktiv Aktiv Weiß 24 W (Maximum)** Energiesparm
Stromverbrauch Pon Gesamtenergieverbrauch (TEC) 16,7 W 54,9 kWh * Ein Null-Stromverbrauch kann im abgeschalteten Modus nur erreicht werden, wenn Sie die Netzleitung vom Monitor abtrennen. ** Maximaler Stromverbrauch mit maximalen Luminanz- und Kontrast-Einstellungen. Dieses Dokument dient lediglich Informationszwecken und gibt die Laborleistung wieder.
Pinbelegungen 15-poliger D-Sub-Anschluss PinNummer 12 Monitorseite des 15-poligen Signalkabels 1 Video - rot 2 Video - grün 3 Video - blau 4 Erde 5 Selbsttest 6 Erde - R 7 Erde - G 8 Erde - B 9 DDC +5 V 10 Erde - Sync 11 Erde 12 DDC-Daten 13 H-Sync 14 V-Sync 15 DDC-Takt
DisplayPort-Anschluss Pin-Nummer Monitorseite des 20-poligen Signalkabels 1 ML0(p) 2 Masse 3 ML0(n) 4 ML1(p) 5 Masse 6 ML1(n) 7 ML2(p) 8 Masse 9 ML2(n) 10 ML3(p) 11 Masse 12 ML3(n) 13 Masse 14 Masse 15 AUX(p) 16 Masse 17 AUX(n) 18 HPD 19 DP_PWR_Return 20 +3.
Plug-and-Play-Fähigkeit Sie können den Monitor an jedes Plug-and-Play-kompatibles System anschließen. Der Monitor versorgt den Computer über DDC- (Display Data Channel) Protokolle automatisch mit seinen EDID (Extended Display Identification Data), damit sich das System selbst konfigurieren und die Monitoreinstellungen optimieren kann. Die meisten Monitorinstallationen sind automatisch. Falls erforderlich, können Sie andere Einstellungen wählen.
Farbskala 82 % (typisch) * 86 % (typisch) * 84 % (typisch) * Modellnummer E2316H/E2316Hr E2416H / E2416HM Bildschirmtyp Aktivmatrix - TFTLCD Aktivmatrix - TFTLCD Paneltyp TN TN 584,2 mm (23,0 Zoll) 509,18 mm (20,05 Zoll) 286,42 mm (11,28 Zoll) 145839,34 mm2 (226,16 Zoll2) 609,7 mm (24,0 Zoll) 531,36 mm (20,91 Zoll) 298,89 mm (11,77 Zoll) 158818,19 mm2 (246,11 Zoll2) 0,27675 x 0,27675 mm Sichtbares Bild Diagonal Horizontaler aktiver Bereich Vertikaler aktiver Bereich Bereich Pixelabstand 0,265 x
Auflösungsspezifikationen E1916H / E1916He Modellnummer E2216H / E2316H / E2316Hr / E2416H / E2416HM E2016H Abtastbereich • Horizontal- 30 kHz bis 83 kHz (automatisch) • Vertikal- 56 Hz bis 76 Hz (automatisch) Maximal voreingestellte 1366 x 768 bei 1600 x 900 bei 1920 x 1080 bei 60 Hz Auflösung 60 Hz 60 Hz Elektrische Spezifikationen Modellnummer E1916H / E1916He / E2216H / E2316H / E2316Hr Videoeingangssignale • E2016H / E2416HM E2416H Analoges RGB: 0,7 Volt ± 5 %, 75 Ohm Eingangsimpedanz
VESA, 800 x 600 46,9 75,0 49,5 +/+ VESA, 1024 x 768 48,4 60,0 65,0 -/- VESA, 1024 x 768 60,0 75,0 78,8 +/+ VESA, 1280 x 1024 80,0 75,0 135,0 +/+ VESA, 1366 x 768 47,7 59,8 85,5 +/+ Vertikale Frequenz (Hz) Pixeltakt (MHz) SyncPolarität (horizontal/ vertikal) -/+ E2016H: Horizontale Anzeigemodus Frequenz (kHz) VESA, 720 x 400 31,5 70,1 28,3 VESA, 640 x 480 31,5 59,9 25,2 -/- VESA, 640 x 480 37,5 75,0 31,5 -/- VESA, 800 x 600 37,9 60,3 40,0 +/+ VESA, 800 x 600 4
Physikalische Eigenschaften Die folgende Tabelle listet die physikalischen Eigenschaften des Monitors auf: Modellnummer E1916H / E1916He Anschlusstyp 15-polig, D-Sub (schwarzer Anschluss); DisplayPort:Schwarzer Anschluss VGA (Kabel nicht inklusive) DisplayPort Signalkabeltyp Abmessungen: (mit Ständer) Höhe Breite Tiefe Abmessungen: (ohne Ständer) Höhe Breite Tiefe Ständermaß: Höhe Breite Tiefe E2016H E2216H 359,0 mm (14,13 Zoll) 445,4 mm (17,54 Zoll) 167,0 mm (6,57 Zoll) 368,9 mm (14,52 Zoll) 471,5
Modellnummer E2316H/E2316Hr Anschlusstyp 15-polig, D-Sub (schwarzer Anschluss); DisplayPort:Schwarzer Anschluss Signalkabeltyp VGA (Kabel nur bei E2316Hr inklusive) DisplayPort (Kabel nicht bei E2316Hr inklusive) Abmessungen: (mit Ständer) Höhe Breite Tiefe Abmessungen: (ohne Ständer) Höhe Breite E2416H / E2416HM 415,0 mm (16,34 Zoll) 544,8 mm (21,45 Zoll) 180,0 mm (7,09 Zoll) 427,58 mm (16,83 Zoll) 566,96 mm (22,32 Zoll) 180,0 mm (7,09 Zoll) 322,0 mm (12,68 Zoll) 544,8 mm (21,45 Zoll) 334,58 mm
Umweltbezogene Eigenschaften Die folgende Tabelle listet die umweltbezogenen Bedingungen für Ihren Monitor auf: Modellnummer E1916H / E1916He E2016H Temperatur • • 0 °C bis 40 °C (32 °F bis 104 °F) Betrieb Nicht im Betrieb Lagerung: -20 °C bis 60 °C (-4 °F bis 140 °F) Transport: -20 °C bis 60 °C (-4 °F bis 140 °F) Luftfeuchte • Betrieb • Nicht im Betrieb Lagerung: 5 % bis 90 % (nicht kondensierend) 10 % bis 80 % (nicht kondensierend) Transport: 5 % bis 90 % (nicht kondensierend) Höhe • Betrie
Qualitätsrichtlinie für LCD-Monitor & Pixel Es ist nicht ungewöhnlich, dass während der Herstellung eines LCD-Monitors ein oder mehrere Pixel unverändert fixiert bleiben. Das sichtbare Ergebnis ist ein fixierter Pixel, der als extrem dunkel oder hell verfärbter Punkt erscheint. Wenn der Pixel dauerhaft leuchtet, wird dies als „heller Punkt“ bezeichnet. Wenn der Pixel dauerhaft schwarz ist, wird dies als „dunkler Punkt“ bezeichnet.
Ihren Monitor einrichten Ständer anbringen HINWEIS: Der Standfuß ist bei Werksauslieferung nicht am Monitor angebracht. 1. Befestigen Sie den Ständer am Standfuß. a. Stellen Sie den Standfuß des Monitors auf einen stabilen Tisch. b. Setzen Sie das Monitorständerteil richtig ausgerichtet auf dem Standfuß ab, bis es einrastet. c. Ziehen Sie die Schraube an der Basis fest. 2. Bringen Sie die Ständereinheit am Monitor an: a. Legen Sie den Monitor nahe der Tischkante auf ein weiches Tuch oder Polster. b.
Ihren Monitor anschließen WARNUNG: Bevor Sie mit einem der Schritte in diesem Abschnitt beginnen, beachten Sie die Sicherheitshinweise. So schließen Sie Ihren Monitor an den Computer an: 1. Schalten Sie Ihren Computer aus und ziehen Sie die Netzleitung ab. 2. Verbinden Sie das schwarze VGA- oder DisplayPort-Kabel mit dem entsprechenden Videoanschluss an der Rückseite Ihres Computers. Verwenden Sie nicht alle Kabel gleichzeitig.
Ihre Kabel organisieren Nach Anbringen aller erforderlichen Kabel an Ihrem Monitor und Computer (siehe Ihren Monitor anschließen), organisieren Sie sämtliche Kabel wie oben gezeigt. Monitorständer abnehmen HINWEIS: Dies gilt für einen Monitor mit Ständer. Wenn ein anderer Ständer gekauft wird, bitte die Aufstellungsanweisungen in der zugehörigen Anleitung beachten. 1. Entfernen Sie die VESA-Abdeckung. a. Platzieren Sie den Monitor mit der Bildschirmseite nach unten auf einem weichen Tuch oder Polster. b.
2. Entfernen Sie die Ständerbaugruppe vom Monitor. a. Drücken Sie mit einem langen Schraubendreher gegen den Freigaberiegel in ein Loch direkt oberhalb des Ständers. b. Sobald der Riegel gelöst ist, nehmen Sie den Ständer vom Monitor ab. Wandmontage (Option) (Schraubengröße: M4 x 10 mm). Beachten Sie die Anweisungen, die dem VESA-kompatiblen Montageset beigelegt sind. 1. Legen Sie den Monitor auf ein weiches Tuch oder Polster auf einem stabilen, flachen Tisch 2. Entfernen Sie den Ständer. 3.
Monitor bedienen Monitor einschalten Drücken Sie zum Einschalten des Monitors die -Taste. Regler an der Frontblende verwenden Verwenden Sie zum Anpassen der Bildeinstellungen die Tasten an der Vorderseite des Monitors. Tasten an der Frontblende Beschreibung A Wählen Sie mit der Voreingestellte Modi-Taste aus einer Liste voreingestellter Farbmodi aus. Siehe OnVoreingestellte Modi Screen Display-Menü (OSD-Menü) verwenden.
B Abwärts C Passen Sie die Optionen im OSD-Menü mit der AbwärtsTaste an (Werte verringern). Bestätigen Sie Ihre Auswahl mit der OK-Taste. OK D Zurück Mit der Zurück-Taste kehren Sie zum vorherigen Menü zurück. On-Screen Display-Menü (OSD-Menü) verwenden Menüsystem aufrufen HINWEIS: Wenn Sie Einstellungen ändern und dann mit einem anderen Menü fortfahren oder das OSD-Menü beenden, speichert der Monitor automatisch diese Änderungen.
HINWEIS: Die Option Auto-Anpassung ist nur verfügbar, wenn Sie einen analogen Anschluss (VGA) verwenden.
2. Mit und schalten Sie zwischen den Optionen im Menü hin und her. Wenn Sie von einem Symbolen zum anderen springen, wird der Optionsname hervorgehoben. 3. Drücken Sie zur Wahl der hervorgehobenen Menüoption erneut die 4. Wählen Sie mit - und -Taste. -Tasten den gewünschten Parameter aus. 5. Drücken Sie zum Aufruf des Schiebereglers die Taste und nehmen Sie dann Ihre Änderungen mit der Taste oder entsprechend den Anzeigen im Menü vor. 6.
Helligkeit Hier können Sie die Helligkeit bzw. Luminanz der Hintergrundbeleuchtung anpassen. Mit der -Taste erhöhen und mit der Helligkeit (min. 0 ~ max. 100). Kontrast -Taste verringern Sie die Hier können Sie den Kontrast bzw. den Grad der Abweichung zwischen dunklen und hellen Bereichen auf dem Monitorbildschirm anpassen. Passen Sie zuerst die Helligkeit an und stellen Sie den Kontrast nur ein, wenn weitere Anpassungen erforderlich sind. Mit der -Taste erhöhen und mit der Kontrast (min. 0 ~ max.
AutoAnpassung Hiermit aktivieren Sie die automatische Einrichtung und Anpassung des Menüs.
Der folgende Dialog erscheint auf einem schwarzen Bildschirm, während sich der Monitor dem aktuellen Eingang anpasst: Durch die Auto-Anpassung kann sich der Monitor automatisch dem eingehende Videosignal anpassen. Nach der Auto-Anpassung können Sie Ihren Monitor über die Regler für Pixeltakt (grob) und Phase (fein) unter Anzeigeeinstellungen weiter einstellen.
Eingabe-Quelle Wählen Sie mit dem Eingangsquelle-Menü zwischen den unterschiedlichen Videosignalen aus, die möglicherweise an Ihren Monitor angeschlossen sind.
Autom. Wählen Wählen Auto-Auswahl, um nach verfügbaren Eingangssignalen zu suchen. VGA Wählen Sie den VGA-Eingang, wenn Sie den analogen Anschluss (VGA) verwenden. Drücken Sie zur Auswahl der VGA-Eingangsquelle . DP Wählen Sie den DP-Eingang, wenn Sie den digitalen Anschluss (Displayport) verwenden. Drücken Sie zur Auswahl der DPEingangsquelle . Farbe Nutzen Sie das Farbe-Menü zur Anpassung der Farbeinstellungen des Monitors.
Eingangsfarbformat Ermöglicht Ihnen die Einstellung des Videoeingangsmodus auf: • RGB: Wählen Sie diese Option, wenn Ihr Monitor über den DP-Adapter an einen Computer oder DVD-Player angeschlossen ist. YPbPr: Wählen Sie diese Option, wenn Ihr DVD-Player nur • den YPbPr-Ausgang unterstützt.
Voreingestellte Ermöglicht Ihnen die Auswahl aus einer Liste voreingestellter Modi Farbmodi.
Standard: Lädt die Standardfarbeinstellungen des Monitors. Dies ist der voreingestellte Standardmodus. • M ultimedia: Lädt Farbeinstellungen, die für MultimediaAnwendungen am geeignetsten sind. • P apier: Lädt optimale Helligkeits- und Schärfeeinstellungen für eine Textanzeige. Simuliert einen Papierhintergrund für Text ohne Beeinträchtigung von Farbbildern. Betrifft nur das RGB-Eingangsformat. • W arm: Erhöht die Farbtemperatur. Der Bildschirm wirkt mit einem rötlichen/gelblichen Farbton wärmer.
Display Nutzen Sie das Anzeige-Menü zur Anpassung der Anzeigeeinstellungen des Monitors.
Längen-/ Stellt das Seitenverhältnis auf 16:9, 4:3 oder 5:4 ein. Seitenverhältnis HINWEIS: Die Einstellung 16:9 ist bei maximaler voreingestellter Auflösung von 1366 x 768 (beim E1916H/E1916He) oder 1600 x 900 (beim E2016H) oder 1920 x 1080 (beim E2216H/E2316H/E2316Hr/ E2416H / E2416HM) nicht erforderlich. Horizontale Verschieben Sie das Bild mit den Tasten oder nach links oder Position rechts. Minimum ist „0“ (-). Maximum ist „100“ (+).
Energie 40 Monitor bedienen
LED der Ein-/Austaste Hiermit schalten Sie die Betriebsanzeige-LED zur Einsparung von Energie im eingeschalteten Zustand ein oder aus. Energie zurücks. Wählen Sie diese Option, um die Standardenergieeinstellungen wiederherzustellen.
Menü Wählen Sie diese Option, um OSD-Einstellungen wie OSD-Sprache, Dauer der Menüeinblendung usw., anzupassen.
Sprache Ermöglicht Ihnen die Auswahl aus acht Sprachen für die OSDAnzeige: Englisch, Spanisch, Französisch, Deutsch, Brasilianisches Portugiesisch, Russisch, Vereinfachtes Chinesisch oder Japanisch. Transparenz Ermöglicht Ihnen die Einstellung des OSD-Hintergrundes auf opak bis transparent. Hier können Sie einstellen, wie lange das OSD-Menü nach dem Drücken einer Taste am Monitor eingeblendet bleiben soll.
Individualisi Mit dieser Option können Sie zwei Schnelltasten festlegen.
Direkttaste 1 Sie können zwischen „Voreingestellte Modi“, „Helligkeit/Kontrast“, „Auto-Anpassung“, „Eingabe-Quelle “ und „Längen-/Seitenverhältnis“ auswählen und als Schnelltaste festlegen.
Monitor bedienen
Direkttaste 2 Sie können zwischen „Voreingestellte Modi“, „Helligkeit/Kontrast“, „Auto-Anpassung“, „Eingabe-Quelle “ und „Längen-/Seitenverhältnis“ auswählen und als Schnelltaste festlegen.
Anpassung zurücksetzen Weiteres Ermöglicht Ihnen, die Standardeinstellung der Schnelltaste wiederherzustellen. Wählen Sie zum Anpassen der OSD-Einstellungen, wie Sprache, Dauer der Menüeinblendung etc., diese Option.
Monitor bedienen 49
DDC/CI DDC/CI (Display Data Channel/Command Interface) ermöglicht einer Software auf Ihrem Computer die Anpassung der Monitoranzeigeeinstellungen, wie Helligkeit, Farbbalance etc. Aktivieren (Standard): Optimiert die Leistung Ihres Monitors und bietet ein besseres Benutzererlebnis. Deaktivieren: Deaktiviert die DDC/CI-Option und blendet folgende Meldung auf dem Bildschirm ein. LCD Conditioning Diese Funktion hilft bei der Reduzierung von geringfügigen Geisterbildern.
OSD-Meldungen Wenn der Monitor einen bestimmten Auflösungsmodus nicht unterstützt, erscheint die folgende Meldung: Das bedeutet, dass sich der Monitor mit dem vom Computer empfangenen Signal nicht synchronisieren kann. Siehe Technische Daten des Monitors für die horizontalen und vertikalen Frequenzbereiche, die für diesen Monitor adressierbar sind. Empfohlener Modus ist 1366 x 768 (beim E1916H/E1916He) oder 1600 x 900 (beim E2016H) oder 1920 x 1080 (beim E2216H/E2316H/E2316Hr/E2416H / E2416HM).
Sie sehen die folgende Meldung, bevor die DDC/CI-Funktion deaktiviert wird. Wenn der Monitor den Energiesparmodus aufruft, erscheint folgende Meldung: Aktivieren Sie den Computer und wecken den Monitor auf, um Zugriff auf das OSD zu erhalten.
Ist das VGA oder DP-Kabel nicht angeschlossen, erscheint ein schwebendes Dialogfenster, siehe unten. Der Monitor ruft nach 5 Minuten den Energiesparmodus auf, wenn er in diesem Zustand belassen wird. Siehe Problemlösung für weitere Informationen.
Maximale Auflösung einstellen Windows Vista ,Windows 7 ,Windows 8 der Windows 8.:1 1. Nur für Windows 8 der Windows 8.1: Wählen Sie die Desktop-Kachel, um zum klassischen Desktop zu schalten. 2. Rechtsklicken Sie auf den Desktop und klicken Sie auf Bildschirmauflösung. 3. Klicken Sie auf die Auswahlliste der Bildschirmauflösung, wählen Sie 1366 x 768 (beim E1916H / E1916He) oder 1600 x 900 (beim E2016H) oder 1920 x 1080 (beim E2216H / E2316H / E2316Hr / E2416H / E2416HM). 4. Klicken Sie auf OK.
Wenn Sie einen Desktop-PC oder einen tragbaren Computer von Dell mit Internetzugang haben 1. Rufen Sie http://www.dell.com/support auf, geben Sie ihr Service-Tag ein und laden den neuesten Treiber für Ihre Grafik arte herunter. 2. Versuchen Sie nach Installation der Treiber für Ihre Grafik arte noch einmal, die Auflösung auf 1366 x 768 (beim E1916H / E1916He) oder 1600 x 900 (beim E2016H) oder 1920 x 1080 (beim E2216H / E2316H / E2316Hr / E2416H / E2416HM) einzustellen.
6. Versuchen Sie nach Installation der Treiber für Ihre Grafik arte noch einmal, die Auflösung auf 1366 x 768 (beim E1916H / E1916He) oder 1600 x 900 (beim E2016H) oder 1920 x 1080 (beim E2216H / E2316H / E2316Hr / E2416H / E2416HM) einzustellen.
Problemlösung WARNUNG: Bevor Sie mit einem der Schritte in diesem Abschnitt beginnen, beachten Sie die Sicherheitshinweise. Selbsttest Ihr Monitor besitzt eine Selbsttestfunktion, mit der Sie prüfen können, ob Ihr Monitor richtig funktioniert. Sind Ihr Monitor und der Computer richtig verbunden, aber der Monitorbildschirm bleibt dunkel, führen Sie anhand der nachstehenden Schritte den Monitorselbsttest durch: 1. Schalten Sie den Computer und auch den Monitor aus. 2.
Integrierte Diagnose Ihr Monitor hat ein integriertes Diagnosewerkzeug, das Ihnen bei der Bestimmung hilft, ob die auftretende Bildschirmstörung an Ihrem Monitor oder an Ihrem Computer und der Grafikkarte liegt. HINWEIS: Sie können die integrierte Diagnose nur durchführen, wenn das Videokabel abgezogen ist und sich der Monitor im Selbsttestmodus befindet. So führen Sie die integrierte Diagnose durch: 1. Stellen Sie sicher, dass der Bildschirm sauber ist (keine Staubpartikel auf der Bildschirmoberfläche).
Allgemeine Probleme Die folgende Tabelle enthält allgemeine Informationen zu üblichen Monitorproblemen, die auftreten könnten, sowie Korrekturvorschläge. Allgemeine Symptome Was Sie bemerken Korrekturvorschläge Kein Video/BetriebsLED aus Kein Bild • Stellen Sie sicher, dass das Videokabel richtig und fest mit dem Monitor und dem Computer verbunden ist. • Vergewissern Sie sich, dass die Steckdose richtig funktioniert, indem Sie ein anderes elektrisches Gerät anschließen.
Wackliges/zittriges Video Wellige Bilder oder feine Bewegungen • Führen Sie die Auto-Anpassung im OSDMenü aus. • Passen Sie die Regler für Phase und Pixeltakt im OSD-Menü an. • Setzen Sie den Monitor auf die Werkseinstellungen zurück. • Prüfen Sie die Umgebungsfaktoren. Fehlende Pixel Dauerhaft leuchtende Pixel Helligkeitsprobleme Punkte auf dem LCDBildschirm Helle Punkte auf dem LCD-Bildschirm Bild zu dunkel oder zu hell • Stellen Sie den Monitor um und testen Sie ihn in einem anderen Zimmer.
Horizontale/vertikale Linien Bildschirm weist eine oder mehrere Linien auf • Setzen Sie den Monitor auf die Werkseinstellungen zurück. • Führen Sie die Auto-Anpassung im OSDMenü aus. • Passen Sie die Regler für Phase und Pixeltakt im OSD-Menü an. • Führen Sie den Selbsttest des Monitors aus und prüfen Sie, ob diese Linien auch im Selbsttestmodus auftreten. • Prüfen Sie, ob Kontaktstifte am Videokabelanschluss verbogen oder abgebrochen sind.
Fehlende Farbe Farbloses Bild • Führen Sie die Selbsttestfunktion des Monitors aus. • Stellen Sie sicher, dass das Videokabel richtig und fest mit dem Monitor und dem Computer verbunden ist. Falsche Farbe Bildfarbe nicht gut • Prüfen Sie, ob Kontaktstifte am Videokabelanschluss verbogen oder abgebrochen sind. • Ändern Sie den Farbmodus im Farbe-OSD je nach Einsatzbereich in Grafik oder Video. • Testen Sie verschiedene Farbvoreinstellungen im Farbe-OSD.
Produktspezifische Probleme Spezifische Symptome Was Sie bemerken Korrekturvorschläge Bild ist zu klein Bild ist zentriert, füllt jedoch nicht den gesamten Anzeigebereich aus Das OSD-Menü erscheint nicht auf dem Bildschirm • Setzen Sie den Monitor auf die Werkseinstellungen zurück. • Schalten Sie den Monitor aus, ziehen Sie den Netzstecker ab, schließen Sie ihn wieder an und schalten Sie den Monitor wieder ein. Kein Eingangssignal bei Kein Bild, LED leuchtet • Prüfen Sie die Signalquelle.
Probleme mit der Dell-Soundbar Allgemeine Symptome Was Sie bemerken Korrekturvorschläge Kein Ton vom System, über das die Soundbar per Netzteil mit Strom versorgt wird Keine Stromversorgung der Soundbar Betriebsanzeige ist aus Kein Ton Soundbar wird mit Strom versorgt Betriebsanzeige leuchtet • Drehen Sie den Ein/Ausschalter / Lautstärkeregler an der Soundbar im Uhrzeigersinn auf die mittlere Position; prüfen Sie, ob die Betriebsanzeige (weiße LED) an der Vorderseite der Soundbar leuchtet.
Verzerrter Ton Die Soundkarte des Computers dient als Audioquelle Verzerrter Ton Es wird eine andere Audioquelle verwendet • Beseitigen Sie jegliche Hindernisse zwischen Soundbar und Benutzer. • Stellen Sie sicher, dass der Audioeingangsstecker vollständig in den Anschluss der Soundkarte hineingesteckt ist. • Stellen Sie alle WindowsLautstärkeregler auf ihren Mittelwert ein. • Verringern Sie die Lautstärke der Audioanwendung.
Unsymmetrische Tonausgabe Geringe Lautstärke Ton wird nur von einer • Beseitigen Sie jegliche Hindernisse Seite der Soundbar zwischen Soundbar und Benutzer. ausgegeben • Stellen Sie sicher, dass der Audioeingangsstecker vollständig in den Anschluss der Soundkarte bzw. Audioquelle hineingesteckt ist. • Stellen Sie alle WindowsAudiobalanceregler (L/R) auf ihre Mittelwerte ein. • Reinigen Sie den Audioeingangsstecker und schließen Sie ihn wieder an. • Beheben Sie SoundkartenProbleme des Computers.
Anhang Sicherheitshinweise WARNUNG: Die Verwendung von Reglern, Einstellungen und Verfahren, die nicht in dieser Dokumentation angegeben sind, kann zu Stromschlägen, elektrischen und/oder mechanischen Gefahren führen. Informationen zu den Sicherheitshinweisen finden Sie in der Produktinformationsanleitung. FCC-Hinweis (nur USA) und Informationen zu anderen Richtlinien FCC-Hinweise und Informationen zu anderen Richtlinien finden Sie auf der Webseite für Richtlinienkonformität unter www.dell.com\regulatory_c