User`s guide

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your
monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Display Settings.
NOTE: Auto Adjust option is only available when you are using an analog (VGA) connector.
Input Source (for
E2013H/E2213H/E2313H
only)
Auto Select
VGA
DVI-D
Use the Input Source menu to select between different video signals that may be connected to your monitor.
Select Auto Select to scan for available input signals.
Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source.
Select DVI-D input when you are using the Digital (DVI) connector. Push to select the DVI input source.
Color Settings Use the Color Settings menu adjust the monitor's color settings.