Brukermanual Dell E2318H Dell E2318HN Dell E2318HX Dell E2318HR Reguleringsmodell: E2318Hf / E2318HNf
MERK: MERK indikerer viktig informasjon som kan hjelpe deg med å utnytte datamaskinen bedre. FORSIKTIGHET: FORSIKTIGHET indikerer at hvis du ikke følger instruksjonene, kan du skade maskinvaren eller miste data. ADVARSEL: DVARSEL indikerer at det kan forårsake materiell skade, personskade eller død. Copyright © 2017-2020 Dell Inc. Alle rettigheter forbeholdt. Informasjonen i dette dokumentet kan endres uten varsel. Reproduksjon av dette materialet på noen måte uten skriftlig tillatelse fra Dell Inc.
Innhold Om skjermen .................................................................................. 5 Pakkeinnhold ...................................................................................... 5 Produktfunksjoner.............................................................................. 6 Identifiser deler og kontroller ............................................................ 7 Monitor spesifikasjoner .....................................................................
Vanlige problemer ............................................................................ 45 Produktspesifikke problemer .......................................................... 48 Dell Soundbar-problem .................................................................... 49 Blindtarm ...................................................................................... 51 Sikkerhetsinstruksjoner ...................................................................
Om skjermen Pakkeinnhold Skjermen leveres med alle komponentene vist nedenfor. Forsikre deg om at du har mottatt alle produktets komponenter. Hvis noen komponenter mangler, vennligst Kontakt Dell . MERK: Noen gjenstander kan være valgfrie og leveres kanskje ikke sammen med skjermen. Noen funksjoner eller medier er kanskje ikke tilgjengelig i noen land og regioner.
VGA-kabel (kun for Europa, Midtøsten og Afrika, unntatt E2318HX / E2318HR) Hurtigstartveiledning Informasjon om sikkerhet og forskrifter Produktfunksjoner Dell E2318H / E2318HN / E2318HX / E2318HR flatskjerm har en aktiv matrise, tynnfilmstransistor, flytende krystallskjerm og LED-bakgrunnsbelysning.
Identifiser deler og kontroller Forfra 1 Funksjonsknapp 2 Strøm På / Av-knapp (med LED-indikator) For å få tilgang til OSD-menyen og endre innstillingene etter behov. For mer informasjon, se Betjene skjermen. Slå skjermen På eller Av. Fast hvitt indikerer at skjermen er slått på og fungerer som den skal. Det hvite lyset blinker for å indikere at skjermen er i standby-modus.
Sett fra siden Høyre side Sett nedenfra E2318H: Merk Beskrivelse elapp 1 2 Strømkontakt DisplayPort-kontakt 3 VGA-kontakt 4 Dell soundbar-monteringsspor E2318HN / E2318HX / E2318HR: 8 Om skjermen Bruk For å koble til skjermens strømkabel. For å koble datamaskinen til skjermen ved hjelp av en DP-kabel. For å koble datamaskinen til skjermen ved hjelp av en VGA-kabel. For å feste den valgfrie Dell Soundbar.
Merk Beskrivelse elapp Bruk 1 2 Strømkontakt HDMI-kontakt 3 VGA-kontakt 4 Dell soundbar-monteringsspor For å koble til skjermens strømkabel. For å koble datamaskinen til skjermen ved hjelp av en HDMI-kabel. For å koble datamaskinen til skjermen ved hjelp av en VGA-kabel. For å feste den valgfrie Dell Soundbar.
Fargespekter 85% (typisk) * Bakgrunnsbelysning lampelevetid (til halv lysstyrke) 30K timer (typisk) Innebygde enheter N/A Tilkobling E2318H: 1 x DisplayPort 1,2, 1 x VGA E2318HN / E2318HX / E2318HR: 1 x HDMI 1,4, 1 x VGA Kantbredde (skjermkant til aktivt område) 17,80 mm (Topp / Bunn) 17,81 mm (Venstre / Høyre) Justerbarhet Høydejusterbart Stativ N/A Vippe -5 ° til 21 ° Sving N/A Dreie N/A Dell Display Manager-kompatibilitet Ja Sikkerhet Sikkerhetslåsspor (kabellås selges separat) * E2
Forhåndsinnstilte skjermmodus Følgende tabell viser de forhåndsinnstilte modusene som Dell garanterer bildestørrelse og sentrering for: Horisontal frekvens (kHz) Vertikal frekvens (Hz) Pikselklokke (MHz) Synkroniser polaritet (Horisontal / Vertikal) VESA, 720 x 400 31,5 70,1 28,3 -/+ VESA, 640 x 480 31,5 59,9 25,2 -/- VESA, 640 x 480 37,5 75,0 31,5 -/- VESA, 800 x 600 37,9 60,3 40,0 +/+ VESA, 800 x 600 46,9 75,0 49,5 +/+ VESA, 1024 x 768 48,4 60,0 65,0 -/- VESA, 1024 x 768
Elektriske spesifikasjoner Modellnummer E2318H Videoinngangssignaler E2318HN / E2318HX / E2318HR Analog RGB: 0,7 volt ± 5%, 75 ohm inngangsimpedans DisplayPort, 600mV for hver differensiell linje, 100 ohm inngangsimpedans for hvert par differensiallinjer Analog RGB: 0,7 volt ± 5%, 75 ohm inngangsimpedans HDMI, 600 mV for hver differensiell linje, 100 ohm inngangsimpedans for hvert par differensiallinjer Synkroniser inngangssignal Uavhengig horisontal og vertikal synkronisering, ikke-polært T
Fysiske egenskaper Følgende tabell viser de fysiske egenskapene til skjermen: Modellnummer E2318H Signalkabeltype E2318HN / E2318HX / E2318HR Analog: D-Sub, 15 pinner Digital: DisplayPort, 20 pinner Analog: D-Sub, 15 pinner Digital: HDMI, 19 pinner Dimensjoner: (med stativ) Høyde 415,0 mm (16,34 tommer) 415,0 mm (16,34 tommer) Bredde 544,8 mm (21,45 tommer) 544,8 mm (21,45 tommer) Dybde 180,0 mm (7,09 tommer) 180,0 mm (7,09 tommer) Høyde 322,0 mm (12,68 tommer) 322,0 mm (12,68 tom
Miljøegenskaper Følgende tabell viser miljøforholdene til skjermen: Modellnummer E2318H / E2318HN / E2318HX / E2318HR Overensstemmende standarder ENERGY STAR-sertifisert skjerm RoHS-kompatibel TCO-sertifiserte skjermer PVC / BFR / CFR-redusert Arsenfritt glass og kvikksølvfritt bare for paneler Temperatur Drift 0 ° C til 40 ° C (32 ° F til 104 ° F) Ikke i drift Oppbevaring: -20 °C til 60 °C (-4 °F til 140 °F) Frakt: -20 °C til 60 °C (-4 °F til 140 °F) Luftfuktighet Drift 10% til
Pin-oppgaver VGA-kontakt PIN-kode Skjermside på 15-pinners sidesignalkabel 1 Video-rød 2 Video-Grønn 3 Video-blå 4 GND 5 Selv-test 6 GND-R 7 GND-G 8 GND-B 9 DDC +5 V 10 GND-synkronisering 11 GND 12 DDC-data 13 H-synkronisering 14 V-synkronisering 15 DDC-klokke Om skjermen 15
DisplayPort-kontakt (E2318H) PIN-kode 16 20-pin side av den tilkoblede signalkabelen 1 ML0 (p) 2 GND 3 ML0 (n) 4 ML1 (p) 5 GND 6 ML1 (n) 7 ML2 (p) 8 GND 9 ML2 (n) 10 ML3 (p) 11 GND 12 ML3 (n) 13 GND 14 GND 15 AUX (p) 16 GND 17 AUX (n) 18 HPD 19 DP_PWR_Komme tilbake 20 +3.
HDMI-kontakt (E2318HN / E2318HX / E2318HR) PIN-kode 19-pin side av den tilkoblede signalkabelen 1 TMDS DATA 2+ 2 TMDS DATA 2 SKJERM 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 TMDS DATA 1 SKJERM 6 TMDS DATA 1- 7 TMDS DATA 0+ 8 TMDS DATA 0 SKJERM 9 TMDS DATA 0- 10 TMDS KLOKKE 11 TMDS KLOKKESKJERM 12 TMDS KLOKKE 13 Ingen forbindelse 14 Ingen forbindelse 15 DDC KLOKKE (SDA) 16 DDC DATA (SDA) 17 GND 18 +5 V KRAFT 19 VARMT PLUGDETEKT Om skjermen 17
Plug and play-mulighet Brukere kan installere skjermen i et hvilket som helst plug-and-play-kompatibelt system. Skjermen bruker Display Data Channel (DDC) -protokollen for automatisk å levere utvidet skjerm identifikasjonsdata (EDID) til datamaskinen slik at datamaskinen kan konfigurere og optimalisere skjerminnstillingene av seg selv. De fleste skjerminstallasjoner er automatiske. Du kan velge andre innstillinger etter behov.
Sette opp skjermen Monteringsbraketter MERK: Stativfoten er løsnet når skjermen sendes fra fabrikken. 1. Monter stativstigerplaten til stativfoten. a. Plasser stativfoten på et stabilt skrivebord. b. Skyv stativet på skjermen ned på stativet i riktig retning til det klikker på plass. 2. Installer stativet på skjermen: a. Plasser skjermen på en myk klut eller pute nær kanten av bordet. b. Juster brakettmonteringsbraketten med sporet på skjermen. c. Sett stativet inn i skjermen til den låses på plass.
Koble til skjermen ADVARSEL: Følg Sikkerhetsinstruksjoner før du starter noen trinn i dette kapittelet. Slik kobler du skjermen til datamaskinen: 1. Slå av datamaskinen og koble fra strømledningen. 2. Koble den svarte VGA, DisplayPort eller HDMI-kabelen til den tilsvarende videoporten på baksiden av datamaskinen.
Koble til HDMI-kabel (for E2318HN / E2318HX / E2318HR) MERK: Grafikken er kun ment som illustrasjon. Utseendet på datamaskinen kan variere. Organisere kablene dine Etter at du har koblet alle nødvendige kabler til skjermen og datamaskinen, (se Koble til skjermen for kabeltilkoblinger), organiser deretter alle kablene som vist på bildet ovenfor.
Fjern skjermstativet MERK: Dette gjelder skjermer med stativ. Når du kjøper andre stativer, kan du se den tilsvarende installasjonsveiledningen for stativ for fjerningsinstruksjoner. 1. Fjern VESA-dekselet. a. Plasser skjermpanelet på en myk klut eller pute. b. Løft fra begge sider samtidig for å fjerne VESA-dekselet fra skjermen. 2. Fjern stativenheten til skjermen. a. Bruk en lang skrutrekker til å skyve utløserhaken i hullet over braketten. b. Etter at du har løsnet låsen, fjern sokkelen fra skjermen.
Veggmontert (valgfritt) (Skruedimensjon: M4 x 10 mm). Se instruksjonene som følger med det VESA-kompatible basemonteringssettet. 1. Plasser skjermpanelet på en myk klut eller pute på en stabil plattform. 2. Fjern braketten. 3. Bruk en skrutrekker for å fjerne de fire skruene som fester plastdekselet. 4. Monter monteringsbraketten i veggmonteringssettet på LCD-skjermen. 5. Følg instruksjonene som følger med det grunnleggende installasjonssettet for å montere LCD-skjermen på veggen.
Betjene skjermen Slå på skjermen Trykk på -knappen for å slå på skjermen. Bruk kontrollene på frontpanelet Bruk tastene på forsiden av skjermen for å justere bildeinnstillingene. Knapper på frontpanelet A Forhåndsinnstilt modus B Lysstyrke / kontrast Beskrivelse Bruk Forhåndsinnstilt modus -tasten for å velge fra listen over forhåndsinnstilte fargemodi. Se Bruke OSD-menyen. Bruk Lysstyrke / Kontrast -tasten for å få direkte tilgang til "Lysstyrke" og "Kontrast" -kontrollmenyene.
Knapper på frontpanelet Knapper på frontpanelet Beskrivelse Bruk Opp -tasten til å justere (øke rekkevidden) i OSD-menyen. A Opp B Ned Bruk Ned -tasten til å justere (redusere rekkevidden) elementene i OSD-menyen. Bruk OK -tasten for å bekrefte valget. C OK Bruk Tilbake -tasten for å gå tilbake til forrige meny.
Hovedmeny MERK: Automatisk justering er bare tilgjengelig når du bruker den analoge (VGA) kontakten. 2. Trykk på knappene og for å veksle mellom alternativene i menyen. Når du flytter fra ett ikon til et annet, blir alternativnavnet uthevet. 3. For å velge det uthevede elementet på menyen, trykk på 4. Trykk på knappene og -knappen igjen. for å velge ønsket parameter. 5.
Tabellen nedenfor viser alle OSD-menyalternativer og deres funksjoner. Ikon Meny og undermeny Beskrivelse Energiforbruk Måleren viser energinivået som skjermen forbruker i sanntid. Lysstyrke / Kontrast Bruk menyene Lysstyrke og Kontrast for å justere Lysstyrken / Kontrasten. Lysstyrke Lar deg justere bakgrunnsbelysningen eller lysstyrken. Trykk på -tasten for å øke lysstyrken, og trykk deretter på for å redusere lysstyrken (min 0 ~ maks 100).
Automatisk justering Bruk denne tasten for å aktivere menyen for automatisk innstilling og justering. Når skjermen justerer seg i henhold til gjeldende inngang, vises følgende dialogboks på en svart skjerm: Automatisk justering gjør at skjermen kan justere seg selv i henhold til inngangssignalet. Etter å ha brukt Automatisk justering, kan du bruke Pixel Clock (grov) og Phase (fin) kontroller under Display for å justere skjermen ytterligere.
Inngangskilde Bruk menyen Inngangskilde for å velge mellom de forskjellige videosignalene som kan være koblet til skjermen. VGA Når du bruker en analog (VGA) kontakt, vennligst velg VGA-inngang. Trykk for å velge VGA-inngangskilde. DP (E2318H) Når du bruker DP-kontakten, velg DP-inngangen. Trykk DP-inngangskilde. for å velge HDMI (E2318HN Når du bruker HDMI-grensesnittet, vennligst velg HDMI-inngang. Trykk / E2318HX / for å velge HDMI-inngangskilde.
Farge 30 Bruk Farge -menyen for å justere skjermens fargeinnstillinger.
Forhåndsinnstil Lar deg velge fra en liste over forhåndsinnstilte fargemodi. t modus Standard: Last inn standard fargeinnstillinger på skjermen. Dette er standard forhåndsinnstilt modus. Komfortutsikt: Reduser nivået av blått lys som sendes ut av skjermen for å gjøre øynene dine mer komfortable å se på.
Angi fargeformat Tillat brukere å sette videoinngangsmodus til: RGB: Velg dette alternativet hvis skjermen er koblet til en datamaskin eller DVD-spiller ved hjelp av en DP-adapter. YPbPr: Hvis DVD-spilleren bare støtter YPbPr-utgang, vennligst velg dette alternativet. Tilbakestill farge Tilbakestill fargeinnstillingene til skjermen til fabrikkinnstillingene. Vise Bruk menyen Vise for å justere skjerminnstillingene på skjermen.
Energi Strømknapp LED Lar strømindikatoren slås på eller Av i På-modus for å spare energi. (E2318H) Lar strømindikatoren slås På eller Av under arrangementet for å spare energi. (E2318HN / E2318HX / E2318HR) Tilbakestill energi Velg dette alternativet for å gjenopprette standard energiinnstillinger.
Meny Velg dette alternativet for å justere OSD-innstillingene, for eksempel språket til OSD, tiden menyen forblir på skjermen og andre. Språk Tillat brukere å stille OSD-skjermen til ett av følgende åtte språk: Engelsk, spansk, fransk, tysk, brasiliansk portugisisk, russisk, forenklet kinesisk eller japansk. Åpenhet Tillat brukere å justere OSD-bakgrunnen fra ugjennomsiktig til gjennomsiktig. Timer Lar brukeren angi hvor lenge skjermmenyen forblir aktiv etter å ha trykket på en tast på skjermen.
Personliggjøre Brukeren kan velge "Forhåndsinnstilt modus", "Lysstyrke / kontrast", "Automatisk justering", "Inndatakilde", "Bildeforhold” og angi det som en hurtigtast. Tilbakestill Tillat brukere å gjenopprette hurtigtastene til standardinnstillingene. personalisering Andre Velg dette alternativet for å justere OSD-innstillingene, for eksempel DDC / CI, LCD-justering og andre.
DDC / CI DDC / CI (Display Data Channel / Command Interface) lar programvaren på datamaskinen justere skjerminnstillingene på skjermen, for eksempel lysstyrke, fargebalanse og andre. Aktiver (standard): Optimaliser ytelsen til skjermen og gi en bedre kundeopplevelse. Deaktiver: DDC / CI-alternativet er deaktivert, og følgende melding vises på skjermen. LCD Denne funksjonen vil bidra til å redusere svak bildebevaring.
OSD-melding Når skjermen ikke støtter en bestemt oppløsningsmodus, vil du se følgende melding: Dette betyr at skjermen ikke kan synkronisere med signalet den mottar fra datamaskinen. For de adresserbare horisontale og vertikale frekvensområdene til denne skjermen, se Skjermspesifikasjoner. Den anbefalte modusen er 1920 x 1080. Før du deaktiverer DDC / CI-funksjonen, vil du se følgende melding.
Når skjermen går i modus Standby, vises følgende melding: Aktiver datamaskinen og vekk skjermen for å få tilgang til OSD. Hvis du trykker på en annen knapp enn av / på-knappen, vises følgende melding basert på valgt inngang: Hvis VGA, DP eller HDMI-kabelen ikke er koblet til, vises en flytende dialogboks. Hvis den forblir i denne tilstanden, vil skjermen gå inn i Strømsparingsmodus etter 4 minutter.
For mer informasjon, se Løse problemer.
Still maksimal oppløsning For å oppnå best mulig skjermytelse når du bruker Microsoft Windows-operativsystemet, må du stille skjermoppløsningen til 1920 x 1080 piksler ved å utføre følgende trinn: I Windows Vista, Windows 7, Windows 8 eller Windows 8.1: 1. Bare for Windows 8 eller Windows 8.1, velg Desktop -brikken for å bytte til det klassiske skrivebordet. 2. Høyreklikk på skrivebordet, og klikk deretter Skjermoppløsning. 3. Klikk på rullegardinlisten med skjermoppløsning og velg 1920 x 1080. 4. Klikk OK.
Hvis du har en stasjonær Dell-datamaskin eller en bærbar Dell-datamaskin med Internett-tilgang 1. Gå til https://www.dell.com/support, skriv inn servicekoden og last ned den nyeste driveren for grafikken. 2. Etter å ha installert driveren for grafikkortet, kan du prøve å sette oppløsningen til 1920 x 1080 igjen. MERK: Hvis du ikke kan stille oppløsningen til 1920 x 1080, kan du kontakte Dell for å høre om et grafikkort som støtter disse oppløsningene.
Bruk tilt Vippe Ved hjelp av stativet kan skjermen vippes for å få den mest behagelige synsvinkelen. MERK: Stativfoten er løsnet når skjermen sendes fra fabrikken.
Feilsøking ADVARSEL: Før du starter noen trinn i dette kapittelet, følg Sikkerhetsinstruksjoner Selv-test Skjermen har en selvtestfunksjon som lar deg sjekke om skjermen fungerer normalt. Hvis skjermen og datamaskinen er koblet til riktig, men skjermen fortsatt ikke lyser, må du utføre følgende trinn for å kjøre skjermens selvtest: 1. Slå av både datamaskinen og skjermen. 2. Koble videokabelen fra baksiden av datamaskinen. 3. Slå på skjermen.
Innebygd diagnostikk Skjermen har et innebygd diagnostisk verktøy som kan hjelpe brukerne med å avgjøre om skjermavviket du opplever, er et iboende problem med skjermen, datamaskinen eller skjermkortet. MERK: Du kan bare kjøre den innebygde diagnosen når videokabelen er koblet fra og skjermen er i selvtestmodus. Slik kjører du den innebygde diagnostikken: 1. Forsikre deg om at skjermen er ren (ingen støvpartikler på overflaten av skjermen). 2. Koble videokabelen fra baksiden av datamaskinen eller skjermen.
Vanlige problemer Tabellen nedenfor gir generell informasjon om vanlige skjermproblemer du kan støte på og mulige løsninger. Vanlige symptomer Det du opplever Mulig løsning Ingen video / Strøm-LED av Ingen bilder Forsikre deg om at videokabelen som kobler skjermen og datamaskinen er riktig tilkoblet og koblet til. Bruk annet elektrisk utstyr for å kontrollere at stikkontakten fungerer som den skal. Sørg for å trykke på strømknappen helt.
Manglende piksler LCD-skjermen har flekker Syklus strøm På /Av. Piksler som er slått av permanent, er en naturlig feil som kan oppstå i LCD-teknologi. Hvis du vil ha mer informasjon om Dell-skjermkvalitet og pikselpolicy, kan du gå til Dells støtteside på: https://www.dell.com/support/monitors. Fast piksel Det er lyspunkter på LCD-skjermen Lysstyrke problem Bildet er for mørkt eller for Tilbakestill skjermen til lyst Fabrikkinnstillinger. Bruk OSD til å justere automatisk.
Synkroniseringsproblem Skjermen er kaotisk eller revet Tilbakestill skjermen til Fabrikkinnstillinger. Utfør automatisk justering via OSD. Juster fase- og pikselklokkekontrollene via OSD. Utfør skjermens selvtestfunksjonskontroll for å avgjøre om den krypterte skjermen vises i selvtestmodus. Sjekk om pinnene i videokabelkontakten er bøyd eller ødelagt. Start datamaskinen på nytt i sikker modus. Sikkerhetsrelaterte problemer Synlige tegn på røyk eller Ikke utfør noen feilsøkingstrinn.
Produktspesifikke problemer Spesifikke symptomer Det du opplever Mulig løsning Skjermbildet er for lite Bildet er sentrert på Sjekk innstillingen Størrelsesforholdet i skjermen, men opptar ikke skjermen Monitor OSD. hele visningsområdet Tilbakestill skjermen til fabrikkinnstillingene. Kan ikke justere skjermen ved hjelp av knappene på frontpanelet OSD vises ikke på skjermen Intet inngangssignal når brukerkontrollen trykkes Intet bilde, LED-lampen er Kontroller signalkilden.
Dell Soundbar-problem Vanlige symptomer Det du opplever Det høres ingen lyd når Soundbar trenger strømadapter for å drive systemet Soundbar har ingen strøm Drei Strøm / Volumknappen på Soundbar - strømindikatoren er av med klokken til midtposisjon; sjekk om strømindikatoren (hvit LED) foran på Soundbar er på. Forsikre deg om at strømledningen til Soundbar er koblet til adapteren.
Forvrengt lyd Datamaskinens lydkort brukes som lydkilde Fjern hindringer mellom lydlinjen og brukeren. Forsikre deg om at lydinngangspluggen er satt helt inn i kontakten på lydkortet. Sett alle Windows volumkontroller til midtpunktet. Reduser volumet på lydapplikasjonen. Drei Strøm / Volumknappen på Soundbar mot klokken til en lavere voluminnstilling. Rengjør og sett inn pluggen for lydinngangskabel igjen. Feilsøk datamaskinens lydkort.
Blindtarm Sikkerhetsinstruksjoner ADVARSEL: Bruk av kontroller, justeringer eller prosedyrer som ikke er spesifisert i dette dokumentet kan forårsake elektrisk støt, elektriske farer og / eller mekaniske farer. For informasjon om sikkerhetsinstruksjoner, se Produktinformasjonsveiledning. FCC-varsel (kun USA) og annen forskriftsinformasjon For FCC-merknader og annen forskriftsinformasjon, se nettstedet for regelverksoverholdelse på https://www.dell.com\regulatory_compliance.