User`s guide

26  Operating the Monitor Operating the Monitor  27

Brightness Brightness adjusts the luminance of the backlight.

Press the button to increase brightness and

Press the button to decrease brightness (min 0 ~

max 100).

NOTE: Brightness control will be greyed out during

“Screen dim” in PowerNap option when screen

saver is activated.

Contrast Adjust Brightness ﬁrst, and then adjust Contrast only

if further adjustment is necessary.

Press the button to increase contrast and Press

the button to decrease contrast (min 0 ~ max

100).

The Contrast function adjusts the degree of

dierence between darkness and lightness on the

monitor screen.

AUTO ADJUST Even though your computer recognizes your

monitor on startup, the Auto Adjustment function

optimizes the display settings for use with your

particular setup.

Auto Adjustment allows the monitor to self-adjust

to the incoming video signal. After using Auto

Adjustment, you can further tune your monitor by

using the Pixel Clock and Phase controls under

Displays Settings.

The following dialog appears on a black screen as

the monitor automatically adjusts to the current

input:

NOTE: In most cases,Auto Adjust produces the

best image for your conﬁguration.

NOTE: AUTO ADJUST option is only available when

you are using the analog (VGA) connector.