User’s Guide
Table Of Contents
- Safety instructions
- About your monitor
- Package contents
- Product features
- Identifying parts and controls
- Monitor specifications
- Plug and play capability
- LCD monitor quality and pixel policy
- Ergonomics
- Handling and moving your display
- Maintenance guidelines
- Setting up the monitor
- Attaching the stand
- Connecting your monitor
- Organizing cables
- Securing your monitor using Kensington lock (optional)
- Removing the monitor stand
- To remove the VESA cover
- Wall mounting (optional)
- Operating your monitor
- Troubleshooting
- Regulatory information
16 │ About your monitor
Electrical specifications
Model E2723HN
Video input signals HDMI 1.4, 600mV for each differential line,100 ohm
input impedance per differential pair.
Analog RGB, 0.7 Volts +/-5%, positive polarity at 75
ohm input impedance
AC input voltage/
frequency/current
100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 1.5 A
Inrush current 120 V: 30 A (max.) at 0°C (cold start)
240 V: 60 A (max.) at 0°C (cold start)
Power consumption 0.25 W (Off mode)
1
0.30 W (Standby Mode)
1
17 W (On Mode)
1
30 W (Max.)
2
14.8 W (Pon)
3
47.07 kWh (TEC)
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting.
3
Pon: Power consumption of On mode as defined in Energy Star 8.0 version.
TEC: Total energy consumption in kWh as defined in Energy Star 8.0 version.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
NOTE: This monitor is ENERGY STAR certified.